Brick Help

[V3N0M]

Hey try hitting the brightness button after holding the 'R' trigger on start up. It’s possible he may have a Ta-082 or higher hardware model with that brightness issue when entering recovery or having the power cord plugged in while in recovery.

[JAKETHESNAKE28]

not just resource but i replaced kn files and a font file

[parkermauney]

Ahhh, kn files can do it.

Just do what I said about the battery.

[JAKETHESNAKE28]

and i do have a ta-082 sorry for not specifing

[JAKETHESNAKE28]

ill try the battery thing

[parkermauney]

Afterwards, when you try and boot up, press the brightness button if the screen's black.

[JAKETHESNAKE28]

ok thanks any other suggestions before i through this at the wall. (jk)

[V3N0M]

and i do have a ta-082 sorry for not specifing

Well it’s possible you may be entering recovery but the screen turns off once you’re in it. This is one of the issues some TA-082 and higher models have after downgrading and upgrading to custom firmware. So hitting the brightness button a few times might turn the screen on and you could find yourself in the recovery menu. It’s worth a shot, otherwise just go with parkermauney’s idea and hope for the best.

[JAKETHESNAKE28]

i guess that im going to have to hope for the best. but i am still up to any sugg that anyone has.

[mcdougall57]

are you definitely sure you have 3.40 oe cause it dont sond like it and if its a semi-bricked non oe psp theres not much you can do and are you sure you have a functioning r button or are holding it in the full time while it powers on instead of just pressing it. if you have fully wiped the flash0 there is nothing you can do or to be more specific what have you messed with in flash0?