Included USB Cable

Hey guys,

Just wondering why I shouldn't be using the included USB cable in my Holux slim 236 cable.

It has power functions and data transmition functions. Doesn't that mean all the lines are intact?

Also, can someone post up a link to the green proggy for the 236. The link is broken.



Jamie

I believe you only need the special cable for the psp-290

k thanx

I still need that green program tho. The link on deniska's site is broken and so is the one in the faq.

Thanks
Jamie

I may be mistaken, but I was under the impression that that program was also only for the psp-290

http://deniska.dcemu.co.uk/interfaci...ony-49390.html

Nah, not that one.

This is from the "yet another mapthis! faq" from above.

"GPS-viewer Green Proggie for serial GPS
http://deniska.dcemu.co.uk/bin/gps_viewer.zip"

The link is broken tho

Originally Posted by jamiejrg

Hey guys,

Just wondering why I shouldn't be using the included USB cable in my Holux slim 236 cable.

It has power functions and data transmition functions. Doesn't that mean all the lines are intact?

Also, can someone post up a link to the green proggy for the 236. The link is broken.


Jamie

The lines are in tact but gpslim 236 does not use usb for nmea transmission. read the specs..
And don't get me started again on usb client/host thing - it has been answered here and in ps2dev forums a million times...
short answer is - it never going to happen :-)

Originally Posted by deniska

The lines are in tact but gpslim 236 does not use usb for nmea transmission. read the specs..
And don't get me started again on usb client/host thing - it has been answered here and in ps2dev forums a million times...
short answer is - it never going to happen :-)

Hmm.. that would explain why it didn't work when i got it all together last night!

I couldn't understand why it wasn't working because i was using the wires that came from the middle and GND lead on the "B" end.

So basicly I'm ****ed until i get a new USB mini cable? Cuz, some guy a few threads down got a new usb cable for his and it seemed to work.

One other question. I used a 2k instead of a 1k because i read at QJ that the circuit works with anywhere from a 1-5k resister. I just wanted to be safe. Should i use a 1k?

Jamie

not for this - it's for psp290 unit

2k may be too much...
you can skip the resistor at all..

you can skip the resistor, but 1K is the safest to go, mainly cause some companys trust it enough to make a pre-made cable with the resistor in it.

*EDIT* Got everything working thanks alot.

Finished product, with uber long cable (btw, the stock usb cable works fine.)