PTF Converter

[wraggster]

News/release of a converter that converts PTF to RCO files.

Heres the Crap translation:

It is benörigt:
Sony PSP with 1.50 kernel
PC with USB cable
RCO editor

Loosely gehts!

1.Downloade and unpacks packs. Copy now the file “psp2ptfconv.exe” to any root of a non removable disk.

2.Kopiere now (.PTF) the file which you convertieren wills likewise on the root where the “psp2ptfconv.exe” is.

3.Gehe now under “start” then “implementing” then enters “note PAD”. Now the Windows Editior should open. Go now on the upper border under “file” and press “memory under…” Jetz should open a small window and presses on “type of file” and selects “all files”. And a column over stands “file name” gives it there test.rco and stores the file aub where the 2 other data is.

4.Gehe still once under “start” and then “implementing” and enter “cmd”. If you in eingabfforderung in it since come to the drive assembly letter where it the files stored this should then so look e.g.: C: > jetz the “psp2ptf.conv.exe” pulls simply on the CMD and leaves then a gap and pulls the .PTF file it to then have wants likewise draus leaves then still another gap and pulls then the Test.RCO file drauf and presses more enter.

5.Nun should be approximate the Test.RCO file 300kb. Copies with file rco and PSP on root your MEMORY stick. The Test.rco copies it in files rco.

6.Startet converter in under MEMORY stick in the XMB uund presses then “circle” the program should then into the XMb come. Still another file goes be “done” in it is your convertierte PTF file file to it now me the RCO editor to start can into the USB mode and then to the file rco and in the file should.

RCO converter follows…

Download and Give Feedback Via Comments

[pkmaximum]

So wait what exactly does this do =P Does the new PSP Slim use .ptf as an extention? Instead of RCO's and this program coverts the .pft's to .rco's lol someone enlighten me =P

[Chameleon]

.ptf files are Sony official custom theme extentions

[DarthPaul]

It would be better if this converts from RCO to PFT. Not PTF to RCO.

[pspforme!!]

It would be better if this converts from RCO to PFT. Not PTF to RCO.

I agree because then you can easily switch themes using the xmb rather than going through the flashing process.

[unpure]

THIS IS AN IMPERFECT TRANSLATION!
USE AT YOUR OWN RISK!
NO RESPONSIBILITY FOR DAMAGE IS ACCEPTED!


Ingredients:
Sony PSP with 1.50 kernel
PC with USB cable
RCO editor

Don't Rush! (go slowly)

1.Download and unpack archives. Copy now the file “psp2ptfconv.exe” to any root of a non removable disk.

2.Copy the .PTF file which you want to convert onto the root where the “psp2ptfconv.exe” is.

3.Go now into “start” then “RUN” then enters “notepad”. Now the Windows [text] Editor should open. Go now onto the upper border under “file” and click “open” Now a small window should open and click on “type of file” and selects “all files”. And the column for “file name” type in test.rco and save the file to where the 2 other data is.

4.Go into “start” and then “RUN” and enter “cmd”. If you run it you should see drive letter where the files are stored this should look so e.g.: C: >. Type in “psp2ptf.conv.exe” which should the open and run [it will pause for a moment] and the .PTF file will be opened and changed to [another pause] Test.RCO. Now you must press enter and it will finish and exit.

5.Now the size of Test.RCO should be roughly 300kb. Copy with file rco and PSP on root your MEMORY stick.

6.Start converter under MEMORY stick in the XMB and presses then “circle” the program should then exit to the XMB. Now ther is an new folder in it is your converted PTF file which is now .RCO. Now put your psp into USB mode and open the newly created .RCO file in RCOeditor and everything should run smoothly.

Hope I could help!