MapThis 0.5.20 with holux support for slim psps

[Codaz]

GREAT

What does the Wifi upload do ?

And the vector data, is it implemented ?

Very good that bugs are fixed and that there is now only one version of the program !!

Should fade many problems away

[r2000]

It used to be that whenever you had the audio/GPS plug plugged in, you would get no sound through the speakers.

However, programmatically it's possible to _still_ output sound through the speakers, even though an audio plug is plugged in.

This is exactly the case with this version of mapthis.

[cydus21]

wait... there are two conrtradicting statement here..

Nieko u r saying that the audio function makes sound comes out thru the speakers when audio/GPS is plugged in.

r2000 u r saying that if we plug in the cable, no sound will come out of the speaker.

so.. which is right? or am i seeing the wrong thing? can't be.. i haven had my beer and its only 11:56 pm!! and if Nieko is right, its not working. i just tried

[deniska]

wait... there are two conrtradicting statement here..

Nieko u r saying that the audio function makes sound comes out thru the speakers when audio/GPS is plugged in.

r2000 u r saying that if we plug in the cable, no sound will come out of the speaker.

so.. which is right? or am i seeing the wrong thing? can't be.. i haven had my beer and its only 11:56 pm!! and if Nieko is right, its not working. i just tried

A few things must happen for this to work:
1) you must run 3.xx version of the program
2) must have ENABLESERIALPORT=1 in config
3)must start up the program w/o anything connected to serial port jack..
This was only tested on M33 3.5 FW and higher..
May not work on some earlier custom firmwares

[Nieko]

The idea is that plugging in headphones normally disables sound through loudspeakers. However, programmatically, sound through speakers can be turned on when an audio cable is plugged in.

This version of MapThis turns on sound through speakers _only_ when you plug in your generic GPS when you've already started MapThis. If you had it plugged in before starting MapThis, audio will be turned off through speakers.

[sky2030]

cant't seem to download... always stops halfway.. any idea why??

edit. download complete.

[cydus21]

hmmm.. weird thing is tat my psp doesn't detect my gps if i turn on mapthis and then plug the gps in. i met all other requirement thou. any ideas?

[r2000]

hmmm.. weird thing is tat my psp doesn't detect my gps if i turn on mapthis and then plug the gps in. i met all other requirement thou. any ideas?

What GPS are you using?
Have you changed the config?
ENABLESERIALPORT=1 for Holux
ENABLESERIALPORT=0 for PSP-290

[shimey]

Hmmm.

I just copied my 5.2 mapviewer folder over my 5.05....

First I got:

" ERROR: COULD NOT START USB ACC DRIVER GPS WILL BE DISABLED "

So I changed serial port to 1 (using holux m1200) and now I don't get the error, but i get no gps info.

THX all- love the new smooth animation and this v. fixed some cursor issues for me......just no gps

EDIT: Looked through the readme AGAIN- and found that I had to be installed under 1.5 and that eboot.pbp had to be in the same directory. Problem solved! THANKS!!

EDIT II: I'm finding that I can't plug in after loading (to use the new sound routing feature) or my gps doesn't show up. I have to be plugged in when I start??

[[][]T-MONEY[][]]

Thanks, going to test it out... I just got my PSP-290 today and have had troubles getting this to work. So hopefully this is it!
*CROSSES FINGERS*

I tried it last night but was too tired to post an update.

I'm running a PSP-1000 /w 3.71M33-3 and a PSP-290

And it worked. I finally locked on to satellites and it worked! Although it said I was on the opposite side of the street LOL. Oh well... maybe I'll save up for a different GPS unit. Good Work!