i did this...and now my slim wont turn on at all. no recovery mode, no nuthing. i tried running it again...but it didnt help.
Changes in version 4
- Installer now checks if user has a custom theme installed, and ask him to disable it before running the program.
- the PSN DRM file in flash2 (act.dat) is now backuped during ms creation and restored in the unbrick.
- flash2 is now formatted too.
- Now installs 3.80 M33-5 instead of 3.71 M33-3.
Making The Pandoras Battery and Memory Stick
If you already have one, skip this step and preceed to the next part
Secondly
Obtain the following
1. A bricked PSP
2. A nonbricked PSP that can run homebrew; 256+mb MS PRO DUO. non PRO will not work
3. A battery
4. Download this : http://dl.qj.net/dl.php?fid=14414
unrar it with winrar
move the "Pandorasbox Setup.exe" into C:/
Start it
press Install.
Now find the folder that you extracted originally and double click the "Shortcut to Pandora's Box.exe"
Click Pandora's Battery REquirements; make sure you meet them
press OK
Click on Pandora's Box Easier-Installer For Pandora's Battery
You should get a Command Window
press 1 then enter
***Note***
If you ant to save the files on yur Memory Stick, do so now.
***NOTE***
Now enter your PSPs drive letter. Just the letter no : or :/. Im my case its G
Now insert the memory stick you wish to use as the Pandora's MAgic MS
Press 1 then Enter
Press Y then Enter
***CAUTION***
This WILL erase your memory stick, and all files will be lost. dont say i didnt warn you
***CAUTION***
AFter you press Y you should see the following SCreen
press 1 then Enter if you do, if not, retry
Exit USB
Remove then replace your MS
RE-enter USB mode
Press 1 then Enter
Wiat
You should get the following screen
if so, press 1 then Enter, if not, restart at beginning
Now put the battery you wish to use as your Pandora's Magic Battery in your PSP.
press 1 then enter
Exit USB
Go to Game on your memory stick and launch "Pandora's Battery Creator"
After program has loaded press triangle
Press 1 then Enter
It should say dumping, then done and exit.
REstart "Pandora's Battery Creator"
Press X
Should say done and exit
Press 1 then Enter
now start "Pandoras Battery Firm. Installer
press X
It will display the following screen then exit
RE-enter USB mode
Press 1 the Enter
You should se the following screen
Press 1 then Enter 2 times
Press Y then Enter
Should See Following Screen
Press 1 the Enter***
Your done with this step, move on to the next***
Modifying The Memory Stick files to work as an Universal Unbricker and 3.80 M33 Installer
Download the 3.80 , 3.40, and 1.50 eboots 3.80 Here 3.40 here(Rename to 340.PBP) and 150 Here(rename to 150.PBP
Place it on the root of your MS.
Download this
Extract it and place the despertar_cementerio in PSP/GAME
Run the program
(- If you have a PTF custom theme set, disable it before running the program)
(if you get the Needs firmwre 271 or higher message, go into recovery mode and turn GAME FOLDER KERNEL to 3.XX)
Press X
Wait
Now you have the Battery and Memory Stick needed to unbrick a PSP.[/size][/color]
Unbricking/Installing 3.80 M33
Put the Battery and MS in the PSP you wish to unbrick/install 380 M33
- Press X to install 3.80M33.
- Press O to install original 3.80
- Press [] to dump nand to nand-dump.bin. When done, psp will auto shutdown.
- Press L+R+HOME+start to restore nand from nand-dump.bin
i did this...and now my slim wont turn on at all. no recovery mode, no nuthing. i tried running it again...but it didnt help.
go into recovery under advanced settings and format your flashes
This is weird I followed every step and the battery works on the psp that is already able to run homebrew apps, which is on 3.03 oe-c yea i know i need to upgrade
anyways i shut off psp and tes it out with my slim thats 3.71 atm, neways it lights up the screen but no options to install the firmware.
I pout the battery and mem stick back into the psp that is already modded and it does show up to install the firmware...
treid couple more tiems finally works Great Tutorila thankx guys
do i download all three firmwares (3.80, 3.40, and 1.50)? or do i just download one firmware of my choice?
plz reply
You need to download all 3 of them.
"Download the 3.80 , 3.40, and 1.50 eboots 3.80 Here 3.40 here(Rename to 340.PBP) and 150 Here(rename to 150.PBP)
Place it on the root of your MS."
I have a few questions about this:
do i put all of the updates on the root of the ms?
will i need to do any hard modding to the battery? And im not supposed to close the pandoras box program throughout the whole process right?
and is there any way that i can end up bricking the second running psp (its my friends and is running on 3.71 m33-2)
and all the files i will be needing are right on this page, right?
thnx
Last edited by hilalk; January 26th, 2008 at 11:23.
Yes the updates go on the root unless otherwise specified
no, you dont need to hard mod, just flash an eeprom which can be unflashed aterwards
no dont close the program until there are no more command prompt windows
no you can brick the other PSP
all the files are linked from this page
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks