On the french board someone provided these colour codes :
orange white silver silver green
this page gives informations on fusing resistors : http://www.koaproducts.com/english/c...147-RF25_C.htm
those fusing resistors use a blue coating and a green color band for identification, this would give us
39 * 0.01 10% = 0,39ohms 1/4W
It can handle up to 800mA without blowing and more for short time, voltage drop at 0.8A = 0.3V so the 5V would read 4.7V for the controllers, which should be ok
If your colour codes are different then post them, it could help determining what type of fuse we could use in place of f1.
Bookmarks