Just to clear things up for a few people, in my case at least it's definitely nothing to do with the files being in the wrong folders, it was working fine last week and nothing has been touched.
Sorry, there isnt a soft downgrader for 3.90M33-2
(I have one that I made for TA-079 mobo's only)
I suggest the following:
0. Go back to your Original firmware, as has been suggested, and try upgrading again using DA's install packages
1. Reset Settings to Default using the XMB
System Settings > Restore Default Settings.
2. Toggle F1 in the XMB and delete the "config.se" file.
This can be done from the M33 menu in the XMB
and the Recovery Menu.
3. Go into the Recovery Menu.
Cool Boot > Hold Right Trigger
Advanced > Format flash1 and Reset default settings.
4. Use Chilly Willy's KeyCleaner
This should help fix any Damaged ID Storage keys you might have.
Storage Volumes are identified by keys that are unique to your PSP.
A storage volume is any interface your PSP uses to get get or send information.
USB, UMD, PHoto's, Movies, IR, Games and so on...
5. Buy a Datel Tool Battery.
Restore your PSP back to 1.5.
That should format the NAND back to a stable state.
Going up strait to 3.80M33 using Despertar del Cementerio 4 should also fix any broken NAND partition and formating problems.
Just to clear things up for a few people, in my case at least it's definitely nothing to do with the files being in the wrong folders, it was working fine last week and nothing has been touched.
The problem may be similar but could have a different cause.
The problem you are having could be caused by:
1. All that I listed above.
2. Counterfeit Memory card.
3. Memory card going bad.
4. PSP card reader going bad.
5. Not using the 3.71 fatfsmod patch.
I have a 2GB ms that reads sometimes and then fails on 3.90M33-2 until I applied the fatfsmod patch.
6. Card not seated properly.
Eject and then firmly but gently reinsert the ms.
Is your memory card formatted at FAT or FAT32
What size is Memory card are you having problems with?
Are you have the same problem with other memory cards?
Is it a Lexar memory card?
Just an update, decided to re-flash to 3.80m33 then update to 3.90 m33-3 and it's working fine.
Decided to get a datel tool battery aswell and I can highly recommend them, great if you only have access to the newer slims.
yeah, you should only get your firmwares from dark-alex.org or the network update
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks