PDA

View Full Version : 3.02OE Installation Guide



splodger15
December 22nd, 2006, 18:50
I thought i would write up a little tutorial for 3.02OE.
I will try to explain it in details for both 1.50 and 2.71se users,

You will need these files:
1- 302OE get it here (http://www.dcemu.co.uk/vbulletin/showthread.php?t=46711)
2- 1.5 update get it here (http://www.psp-hacks.com/file/4)
3- 3.02 update get it here (http://www.psp-hacks.com/file/937)
4- usb cable
5- PSP

Downlaod all of these files.

extract the 302OE ziped file, you will get the following files as shown in the following image:

http://img146.imageshack.us/img146/5240/1em8.png

Now for 1.50 users copy the two folders oeupdmaker and oeupdmaker% to /PSP/GAME/ so it will look like this image: http://img117.imageshack.us/img117/7523/2bv0.png

If you are using 2.71 SE copy the two folders to the GAME150

Rename the 1.50 update you downloaded earlier to 150 then rename the 3.02 update you downloaded earlier and rename it to 302.Just like the image shows: http://img75.imageshack.us/img75/1157/3ht1.png

After renaming put them on your PSP inside the "oeupdmaker" folder, then disconnect your PSP from the computer. It should look like this: http://img344.imageshack.us/img344/8672/4yn6.png

Run the oeupdmaker like you run any homerew, it will start creating the DATA.DXAR file, it will take less than 5 minutes to generate it, this process involves NO flashing, so 100% safe, no need to have your PSP plugged in the charger

Wait till it completely finish and it will exit by itself.

Now connect your PSP to the pc again, you will find the DATA.DXAR file that we made inside the oeupdmaker folder, It will look like this: http://img172.imageshack.us/img172/9007/5nl4.png

Now we are going to begin flashing 3.02

This process requires flashing and like anything that flashes your PSP there is always a chance of BRICKING.

Aslong as you have done everthing correct you should be fine.

Now we will use the other two folders we extracted earlier, 302oeflasher and 302oeflasher% ,
You will need to copy these two to GAME folder on your PSP "in 1.50". And in the GAME150 folder if you are using 2.71 SE(Any version) Look at the image: http://img102.imageshack.us/img102/6231/6jw9.png


Next move the DATA.DXAR file that we made earlier to "302oeflasher" folder, then disconnect your PSP from the pc, make sure the battery is charged above 75% and plug it into your charger. Look at the image: http://img295.imageshack.us/img295/7427/7lw9.png


Now go to the flasher from you PSP and run it, it will show you a warning message, just press X and it will start, the process may take 5 minutes,


DONíT turn off the psp or remove the Memory stick or pull out the battery during the process.

When it will finish it will ask you to restart your psp manually, here turn off the PSP then turn it on, and you have 3.02OE.

After you finish you can just delete the folders 302oeflasher, 302oeflasher%, oeupdmaker, oeupdmaker% with all their contents.


Enjoy

gamerremag
December 23rd, 2006, 01:08
computer wouldnt go to this site for a while....what is 3.02oe?

englishrick
December 23rd, 2006, 01:52
How do I get VCS cheat to work on this?????????

cha0ticbliss
December 23rd, 2006, 01:56
The site was down.... It is 2.71 SE except on 3.02 firmware.

angusW
December 23rd, 2006, 08:34
Nice tut splodger15. Thanks. I'll try it out once I get home from work.

gamerremag
December 23rd, 2006, 15:30
The site was down.... It is 2.71 SE except on 3.02 firmware.

thnx

angusW
December 24th, 2006, 02:24
Every time I go to the flasher it will say that the battery has to be at least 75%, it's at 100% and the power cable is plugged in. The screen will then go black for about 10sec and then it will go to the xmb.

I followed the above process to a "T". What gives? I'm on fw 1.5 btw

Ok. Nevermind. I by-passed that message by pressing the triangle and L buttons at the same time. In the processing of flashing at this time.

Flash successful. Right ON.

gamerremag
December 24th, 2006, 04:20
uh, kool

qskint
December 25th, 2006, 18:32
thankyou, worked like a charm

Roxas
December 26th, 2006, 07:03
Is good but, Im wondering something cuz i have my 1.5 with dev,Do i just install it or wat?

splodger15
December 26th, 2006, 09:33
Its up to you .you can stay with 1.5 or go to 3.02OE A

Roxas
December 27th, 2006, 09:46
No.No, lol Sry I Didnt make myself clear enough, i would love to upgrade but, im was wondering of how since my 1.5 has dev, like do i have to format my MS or do i just install it over with dev on it.

splodger15
December 27th, 2006, 10:18
Just format it then install all the files required

Roxas
December 27th, 2006, 11:17
k thx.

jonezybaby
December 29th, 2006, 23:23
id watch it tho cus since ive been usin 3.02OE-B with the PSX games, my 2gb memory stick has gone up shits creak!! dunno why cus it was fine b4

flame0247
December 30th, 2006, 02:43
i need help, it says put the 2 eboots in the oeupdmaker folder but wat should i do with the one thats inside?

gamerremag
December 30th, 2006, 03:17
name the 1.50 eboot to 150.pbp

then name 3.02 eboot to 302.pbp

flame0247
December 30th, 2006, 03:29
I did it i did it!!! wait its OE-A thou , how do i make it OE-B? and whats the diffrence

razorak
December 30th, 2006, 03:32
u use the OEB updater...OE-B has the PSX emulator unlocked i believe

gamerremag
December 30th, 2006, 04:18
u use the OEB updater...OE-B has the PSX emulator unlocked i believe

it does, you just have to use the popstation to turn your backup file (from ripping the cd) to an eboot.pbp file so the psp can read it. less complicated than it sounds

razorak
December 30th, 2006, 04:21
though the trouble for some would be the lack of the keys.bin and the base.pbp files...ar well..there's always ready made ones...lol

gamerremag
December 30th, 2006, 04:22
lol

mnuhaily22
December 30th, 2006, 04:41
razorak, I recall you hated being at 2.71, but now I'm glad you have reached 3.02 OE.

razorak
December 30th, 2006, 04:48
nar...2.71 with hen-d was still better than 2.6 with gta.

tho after a while people become unappreciative of what they have and want more, greed.

But i'm happy to say that having waited for barely 6 months, i've saved myself a decent bit of money. (i bought my psp in june)

btw i didn't really hate being at 2.71 but rather having a ta-082 :). Hen-D was the best substitute i could have, this i must admit. And it's all thanks to DA.

Patience usually pays off =)

edit: Oh, you were ta-082 too. been away for too long...busy studying for a rather long period of time. I just downgraded yesterday and today i'm gonna pass my fren all the necessary files for the downgrade and updating to 3.02 OE-B since his PC is just so laggy and he's a lazy, impatient person >.<

gamerremag
December 30th, 2006, 05:25
^congrats on the downgrade :)

feight
January 2nd, 2007, 04:47
I've spent over 20 minutes creating the DXAR file. Is it really supposed to be less than 5 minutes? If so, I'm not sure what is wrong, it's currently "Extracting and packing 3.02 firmware...

splodger15
January 2nd, 2007, 09:48
^ ^
You are doing something wrong

johni
January 6th, 2007, 20:39
i have a problem....

i came to that part when u start the updater on your psp (there where it should lasts 5 minutes). I start it and then it says:

opening and checking 150.pbp file...
cannot open file...

whats the problem here?

it's true that it creates data.Dxar file but its 0 KB larg and i know thats not wright.

plz help me what to do...i've also re-tried the presteps so there is no mistake..i'm sure

thx

Shrygue
January 6th, 2007, 20:44
Maybe you forgot put the 150.pbp file inside the X:\PSP\GAME150\oeupdmaker folder (where X is the letter of your memory stick root)?

xg917
January 6th, 2007, 20:49
mostlikely, but if he forgot then it wouldve said cannot FIND 150.pbp file...

johni
January 6th, 2007, 20:56
no i've put both inside oeupdmaker, and i have checked that right now...

any other suggestions? thx

splodger15
January 6th, 2007, 21:11
^ ^
Why dont you just delte that post

johni
January 6th, 2007, 21:19
done...sry.

and i've tried like 5 times and now had done it.
it has created data.dxar

but when i've tried to flash it (i've run 3.02 OE-A Firmware install) all i get its screen where it says the battery must be at least 75% charged then blankscreen appears and it returns to XBM.

whats wrong now?:(

johni
January 6th, 2007, 21:29
i've looked under
system information->battery information
...it says 82% and the charger is on.
is the measurement wrong or all i have to do is trying and trying (thats what helped with previous problem:/)

thx for help though