[OLD] PS3 Sixaxis Controller Can Be Used In Windows!

[game kid]

how do u unzip a RAR file

[Shrygue]

Get a program such as WinRAR or ALzip that can unpack RAR archives.

[Desktop]

I had run ps3sixaxis_en from start, Run, typing in cmd, and then running ps3sixaxis_en from there, just double clicking it didn't make the controller work on the test screen.

[casketgrind]

im having the same problem when i run the program it goes on for a second before it turns it self off. when i go to my task manager i dont see anything different. i dont think its runs anyway how to fix this?

[Maus]

im having the same problem when i run the program it goes on for a second before it turns it self off. when i go to my task manager i dont see anything different. i dont think its runs anyway how to fix this?

Seriously, have you not read any of the previous pages?

It's supposed to open and close...

[kiasta]

Does anyone know how to completely remove the libusb program? I downloaded the drivers but not from this site, and it was packed with the 1.12.1 version of libusb, when I uninstall it and install libusb 1.10.1 it does not work, the test says version 1.12.1 driver version -1,-1,-1,-1. I deleted the libusb0.dll from windows/system32 but it did nothing the driver version stays the same and so does ther version number, any idea's?

[s0nlxaftrsh0ck]

Hello everyone my brother had installed your PS3 Sixaxis drivers and it works perfectly for RE4. And well through some trouble shooting it appears to be interfering with my Creative Vision M. Now..i know how to enable the USB through command prompt using ps3sixaxis_en..but...how do i disable it exactly?

[gsp_mtl]

My controller is wokring perfectly now (aside from the configuration). The sensitivity problem is over with. the one problem is that the game I want to play the most (a crack of Madden '08 on the PC) keeps crashing when I try to change the button config with the PS controller. Any suggestions? Happening in any other games or is it simply because my version is a crack?

[lebowski4]

This is the one thing that did work for me. I tried every solution up to this point.

Also please note that if you run ps3sixaxis_en.exe from the command prompt its easier to see the "found PLAYSTATION(R)3 SIXAXIS controller" message.

good job dude.

thank you so much!!!

it worked!
It is still flashing red, but I don't care.
You are my savior!
now for some n64

[lebowski4]

For those having trouble unzipping files - its called google. Use it like your life depended on it.

[Omega-Dhampir]

Worked and was easy as pie. Thanks very much!

[Bacherrabit]

Anyone that is STILL having trouble (like i was) try TURNING OFF YOUR PS3 if you have one near your computer.

If its on while your trying to use a ps3 controller on your pc, its not going to work.

[Chainsaw745]

happend with me too

[Glitchie]

i did what it said and i ran the .exe that opens the command prompt and then ran p64 and halo and it worked great but after i restarted my computer it was being recognized but wouldnt work anymore even after many unisntall reinstall attempts

[Glitchie]

ok although i consider myself a complete idiot i may have found something on the issue of it not working ... first have i tplugged in and go start>run>cmd .... that should open command prompt then drag the ps3sixaxis_en.exe onto the command prompt this should enter the directory to it and hit enter... wait and it should say "found plastation 3 controller" now go to start all programs and open the libusb test program... u should see something implicating its recognizing the ps3 controller....now the problem i had is it would always say the name of another usb device i had plugged in so u can try either re running ps3sixaxis_en.exe through cmd and checking under the libusb test program to see if it recognized it and if not try unplugging the detected usb device and running ps3sixaxis_en.exe again. after u get libusb to recognize it u should be set but the main issue i had is it would do this crap all over again when i unplugged the controller or restarted my computer so just run libusb test and do all that crap again till it works.

[Bass_Virus]

I have it working to the point where the controller shows/can be calibrated via the control panel.
My problem is that no games i have tried it on (admittedly only CoD4/BIOshock so far) have accepted the input AT ALL.
Is this a game compatibility thing or can i fix this? I personally prefer mouse+keyboard in almost any scenario but my brother is more comfortable with dual joystick.
If all else fails i know the 360 pad is practically plug and play but i don't have a 360 and would rather not have to spend the cash on a controller for a console i don't have.

*edit* it seems to work with games that accept joystick input (X3 and FlightSimX tested in a moment of inspiration). Which sucks because why the hell would i play any game that i use my x45 for with a dual joy (okay, maybe mechwarrior but that is a stretch)?

Does anyone know of a way that i can install it as a standard gamepad as opposed to a joystick (using a generic driver or the like)? Maybe if i could do that i would be able to bind, i doubt it would work but it is probably worth the trouble to save me the cash for a new control pad (we be po').

Also can anyone confirm if placing sixaxis_en.exe in the start folder runs it properly at boot?

*edit number 2* using this program http://www.redcl0ud.com/controlmk/index.html i was able to bind it to my keyboard/mouse so i guess i solved my own problem in that regard. ill test my startup question after im happy with my binds, ill let you know if it works (if anyone is actually reading this).

[gamegeek2107]

i cant get this to work it just keeps asking me to open or save no matter what i click

[sparky13]

Worked for me too.Thanks a lot!!!

[karl_w_w]

VISTA USERS:
64 bit is not supported, you have to hope that both libusb and the sixaxis loader get updated (which isn't looking likely)
32 bit there is a workaround, here's how to do it:
1- download the package (http://dl.qj.net/SIXAXIS-driver-for-PC-PlayStation-3/pg/12/fid/11679/catid/518)
2- unpackage the files to somewhere you will keep them.
3- if you have previously installed it, make sure you delete the files C:\Windows\System32\libusb0.dll and C:\Windows\System32\drivers\libusb0.sys. This applies even if you uninstalled it already.
4- right click the installer (libusb-win32-filter-bin-0.1.10.1.exe), go to the compatibility tab, and choose XP SP2 compatibility.
5- right click the installer and run it as administrator.
6- when the installer is done you can plug your controller in
7- run ps2sixaxis_en.exe
8- press the PS button a few times, and it should now work.

General tips:
* You have to run ps2sixaxis_en.exe every time windows starts (I just put a shortcut to it in my start menu -> startup)
* Remember that if your PS3 is nearby you have to turn it off at the switch or wall
* I read that some games will recognise the left stick as a joystick, although I haven't tried it out yet
* Don't use the latest libusb, it doesn't work with ps2sixaxis_en.exe and it gives you a BSOD every time you shutdown.

Spread the word:
Not many people know how to get it working on Vista - it took me a bit of trial and error to make it work. If you know people/boards who need this info copy/paste it to them. It'll only take you a few seconds.

[Madonion]

VISTA USERS:
64 bit is not supported, you have to hope that both libusb and the sixaxis loader get updated (which isn't looking likely)
32 bit there is a workaround, here's how to do it:
1- download the package (http://dl.qj.net/SIXAXIS-driver-for-PC-PlayStation-3/pg/12/fid/11679/catid/518)
2- unpackage the files to somewhere you will keep them.
3- if you have previously installed it, make sure you delete the files C:\Windows\System32\libusb0.dll and C:\Windows\System32\drivers\libusb0.sys. This applies even if you uninstalled it already.
4- right click the installer (libusb-win32-filter-bin-0.1.10.1.exe), go to the compatibility tab, and choose XP SP2 compatibility.
5- right click the installer and run it as administrator.
6- when the installer is done you can plug your controller in
7- run ps2sixaxis_en.exe
8- press the PS button a few times, and it should now work.

General tips:
* You have to run ps2sixaxis_en.exe every time windows starts (I just put a shortcut to it in my start menu -> startup)
* Remember that if your PS3 is nearby you have to turn it off at the switch or wall
* I read that some games will recognise the left stick as a joystick, although I haven't tried it out yet
* Don't use the latest libusb, it doesn't work with ps2sixaxis_en.exe and it gives you a BSOD every time you shutdown.

Spread the word:
Not many people know how to get it working on Vista - it took me a bit of trial and error to make it work. If you know people/boards who need this info copy/paste it to them. It'll only take you a few seconds.


Mine worked perfectly on vista 32bit from the start :D. Anyway im having trouble with rugby 08 and fifa 08. i just wish there was a place to calibrate the controller in windows to make some buttons standard. Pro evo08 detects all the buttons fine but cause there is no calibration in rugby my left stick is to run fast and everything is just in the wrong place.

[lyrical_mc2008]

Get a free PS3 by clicking on th link:
http://ps3.freebiejeebies.co.uk/?id=5119

alternatively copy and paste it into your browser

If im not allowed to do this please let me know and i will delete it.

[lyrical_mc2008]

Free PS3
http://ps3.freebiejeebies.co.uk/?id=5119

[jarhead714]

i installed the driver and when i get run the ps3sixaxis_en.exe a cmd prompt comes up for 1 second and says five buses found
i ran the test as well and it registered everything well what can the problem be?

[Psychosisx]

Does anyone know if this supports like all games? The controller works fine but all i really have on my comp for a controller is steam games. I tried 'Portal' i can move backwards forwards etc with the left analogue but no other button did anything. e.g. No way to shoot a portal, look up or down. Any help on this im not great with figuring out these sorts of things and also im pretty lazy :P

[rdchili69]

I got my controller to work, I went to configure the controller. When going to do analog stick, I can only set up and left up and right, down and left or down and right for each analog stick.

I am using Project 64 and No Mercy, Every other control I can do but the analog sticks, now I only have two taunts because I can only use two of the directions on each analog stick.

I had to divide up the c-buttons one of them is square, left and right ones are the l2 and R2 triggers, l1 and r2 are the L and R buttons

I can play the game but can only perform two taunts, not a big deal but still.

Will take some getting used to but I can play the game no problem and that is all that matters, so I lose two taunts, big deal everything else works.

[ELLIS1991]

ok i got it to work but how do i stop the lights from flashing cause the controler does not work with them on.

[dds1043]

hey the guy with the command prompt issue.. goto start click run then type in cmd and click ok.. then navigate and run the exe is wont disapear

[AshtonNewton]

Same problem guess i got no luck with using Vista nad all lol.

[Nephel]

nt

Doesnt work with Windows XP Pro x64 Edition

[grave11]

hmmm..

works like a charm....i tried to check everything in the control panel....every button responds...


but sadly.....in fifa07 ..... the buttos "X" "O" "[]" and "/_\" are unconfigurable...the game just does not recognises these buttons.

Is there a way i could like use a script to give it ps2 style macros?

[grave11]

Oooooooh and wouldnt it be Cooler if we Could Connect to the PC Via Bluetooth?!!??!!

EvolVE

[supersonicplayer369]

This was the only thing in this WHOLE thread that helped me :D thank you a million times.

[caino3003]

when i download the attachment it comes up as an adobe file but adobe can't read it. what should i do?

[creoleplane]

Unless the actual 6 axis controls are implemented it wouldn't be much better than the xbox 360 controller which also works with windows XP.

Yeah, you're kinda right, except the PS3 controller is much more comfortable and works much better for old school games than the 360 hunk of crap does.

[VAs RHD Hachi Roku]

Got mine to work on VISTA Ultimate 32bit, before I give my FAQ, I need to spell out a few things.

STOP AND READ, if any of these are you don't continue.
1.) If you cant open a rar file, and are stuck there, then you are a retard and shouldn't be doing this.
2.) If you don't know that dos windows open then close unless in a command prompt, you also fall into the retard category as the people in number 1.
3.) The lights are suppose to blink 29 pages and you still don't get it?
4.) NO it doesn't work via blue tooth only cable.
***Now I feel better****

Here was my issue.
Bought a new PS3 controller (dont own a PS3)
Plugged the controller in, Vista found some crazy driver for it, nothing to do with Human Interface Devices of HID's, didnt show up in the Game Controllers either. But the ps3sixaxis_enu did show it was connected.

My Vista was trashed anyways so I did a fresh installed.

1.) First thing I did once I logged in for the first time before anything else was plugged the ps3 controller in with Device Manager open.

Vista found the controller this time and placed it under Human Interface Devices!
(YES one step further than before)

2.) Next thing I did was unplug and plugged it into all of my USB ports to make sure it was recognized by all them as an HID device! *optional*

3.) Went to the control panel then game controls and it shows up.

4.) Unrared the file (Already had it backed up before redoing my Vista)

5.) Next figured run the PS3sixaxis_en.exe, but it tells me its missing a DLL file.

6.) I installed the LibUSB-Win32-0.1.10.1 file, ran the test and it showed verions 1.10.1 like it should.

7.) Ran the ps3sixaxis_en.exe, it opened and closed like it should.

8.) Went back into game controllers and clicked advanced, All the buttons were working and the axis were working did not have to calibrate or push the Playstation button for 5 second.

***Other things***
Having a shortcut to the PS3sixaxis_en.exe in your startup is ok, but here is something I noticed, if I unplug the controller once windows is booted up, then plug it back in again. I have to run the PS3sixaxis_en.exe.

So everytime you plug and plug your controller back in, it will need to be re-ran. I found this out because buying a PS3 controller they dont give you a USB to mini USB cable, so Im sharing a cable with my external hard drive for the time being.

Either way, most likely the problem is people have so many different programs and stuff installed on their system. A clean install and the first thing done is plug in the controller, even before the video drivers or any other drivers for the system might fix your problem.

[keyroon13]

any1 got it workin yet

[popoprd]

maybe the wrong downloaded driver?

[popoprd]

me works it well

[j90graham]

yea i have the exact same problem. hmm...

[Fortran]

not to add more stuff to the confusion but ...

there's no libusb0 file on vista :D (only on xp)

the driver works, and the controller is recognized

but is more of a hit or miss type of thing ...

(using the same drivers in a HORI FS3)

*** keeps fingers crossed ***

[nbaballerz12]

go to this link http://dl.qj.net/WinXP-PC-drivers-fur-den-SIXAXIS-Input-Devices-Software-Drivers/pg/12/fid/12155/catid/47 the one that was posted didnt work good and it should work because i was playin halo with the SIXAXIS controller and it works alright

[innuendo]

I seem to have found the source of problems. So here's the stroy:

It works fine on my sister's PC. The controller appears like this in her Device Manager :

http://img1.tar.hu/crash/img/33180448.jpg

You see ? It says it right there in the red circle I added.

On my PC, it doesn't work. And here's how the controller appears in my Device Manager:

http://img1.tar.hu/crash/img/33180449.jpg

See? It isn't named PS3-blablabla, just "USB device". And so it is no wonder the ps3sixaxis_en.exe cannot find it.

I don't really know how to solve this, but I was kinda hoping that the founder of this driver would. Hope tihs helps him.

PS.
Sorry about the gibberish language in the pics xD , but I think the point can be made out

[preetyforu]

Surprising? It was only a matter of time. Yes, the SIXAXIS can be used in Windows. wraggster was able to come up with a driver for you PC to recognize the PS3 controller. It works as a USB HID on Windows, but he still recommends that your OS should be Windows XP or higher.

Here are the instructions:

Download and install the filter driver (libusb-win32-filter-bin-0.1.10.1.exe).
Unpack ps3sixaxis_en.exe
Plug the SIXAXIS into your PC.
Run ps3sixaxis_en.exe once.
Push the PS button on the SIXAXIS once if it doesn’t see it straight away.
Now before anything else, we’ve been hearing that the driver doesn’t work for a couple of people. We’re really not sure why, but if you follow the instructions carefully, we’re sure you’d do fine. We’ve even gotten confirmation that someone was able to run it on a MacBook Pro via Boot Camp Win XP.

Yeah, the motion-sensing doesn’t work, but hey!, it’s a damn good start as any other! If the Wiimote’s motion-sensors are already recognized, then soon enough, the SIXAXIS would be just as competent.

preety
webmaster
http://www.entertainmentvenues.org

[preetyforu]

I ran the libusb thing and got the ps3 controller working just fine. The only problem is that the driver caused my Zune mp3 player to not be recognized.

preety
webmaster
http://www.entertainmentvenues.org

[rawzkee4]

i installed the lilusb0 file, and right after installation my usb ports do not work (USB mouse stops working, external hd, etc.) Also, i ran the test and it showed version 1.12.1 - any help? btw, running vista 32.

[jedijawn]

thanks it works great. but is there a way to bind the buttons? im trying to use this controller in Lost Planet but all of the buttons are set up in a weird configuration. is there a way i can bind the buttons to the way i want them to be?
Try using Xpadder....it is a software program that lets you configure any controller using keyboard settings and mouse....here is the link...http://www.xpadder.com/ its also free... :)

[resinfy]

To everybody who is having problems getting Windows to recognize the buttons:

First, be absolutely sure that both libusb0.dll and libusb0.sys are version 0.1.10.1 in your c:\windows\system32 and c:\windows\system32\drivers directory's. You can find these files easily by doing a search for "libusb". If they are not version 0.1.10.1 then delete them and reinstall libusb-win32-filter-bin-0.1.10.1.exe.

Once you have reinstalled libusb-win32-filter-bin-0.1.10.1.exe run ps3sixaxis_en.exe.

You should now go into Control Panel -> Game Controllers -> highlight "Playstation(R)3 Controller" -> Properties. Press the Playstation button on the controller and it should work.

I had a hell of a time trying to figure this out. I hope this helps everybody.

[TooTing]

Could someone give me some intructions with more info on how to make this thing work for online games?

[_rid]

resinfy, thanks a lot, it works now=)

[PSPNEWBIE1234567]

After reading all 20+ pages, again, I know at which drivers you are referring. Post 18, am I right? If so, may I ask you something? Do you READ before you reply?
That "japanese" driver does NOT, I repeat, DOES NOT make Bluetooth working. Thanks for giving people false hope.
I'm Sorry i gave you false hope, but there are people that are having problems with the usb use

[hockey2112]

I had some trouble getting this set up, but only because I wasn't paying close attention and installed the wrong driver version. I did a system restore to earlier in the day, installed the correct driver, and everything works great now! I hope someone can figure out how to get the Bluetooth working though... I have a dongle ready to get some use! :)

[Robincol]

Controller wont go to 1 all the lights keep flashing, and that command window comes up for like half a second and has something about detecting 8 busses on it, thanks.

[amras_telemnar]

Okay, guys. I read to page nine of the thread, and tried every remedy that had sprung up.

I am running Vista x64 Ultimate. I followed the instructions as accurately as i could. As everybody else is stating, the controller blinks with all four leds. I gathered this is how it should be.

Now, in Device Manager the controller is listed in the "Human Interface Devices" twice. You've got the "HID-compliant game controller" and a "USB human interface device" which I had two of before I installed. Inside the test-program it says:

"DLL version: 0.1.10.1
Driver version: -1.-1.-1.-1

bus/device idVendor/idProduct"

Always the same. Tried to press the PS-button, to hold it for 5 seconds, for 10 seconds, inside the properties for the driver and I also tried not to press it.

Anyone with exactly the same problem in 64-bit Vista? And has the sprung up any remedies for this?

[Robincol]

1. Download the files, and use the "libusb-win32-filter-bin-0.1.10.1" file. Follow the instructions until its installed.
2. Plug in the PS3 controller.
3. Open control panel, then game controllers. Make sure its on there. You should notice the PS3 controller is doing nothing right now. Open properties for the controller to enter the test screen, and leave it there.
4. Run "ps3sixaxis_en". It SHOULD open and close. Now go back to the screen where the controller test is and hit the PS button a few times. Button 17 should light up. If it does, congrats, your controller is working.

Thats how i got it to work, I love you guys!

[gregor100]

Mine just opens and then stops responding :/ wanna use the controller for css and that

[gregor100]

Also, when i install the first program my mouse stops working? And the ps3 controller doesnt work (move the poniter) so i have to go to control pannel using only arrows and then uninstall it (the mouse seems to turn of as the red led on it turn off) someone help?

[gregor100]

Oh and btw, you guys should unplug your ps3 (my controller doesnt work but it was turning on my ps3 at first lol, from downstairs)

[Squeeble02]

I love you guys. Worked like a charm. Thanks.

[nearx]

ty

[evilpownerr]

i downloaded it then i cant open it..........what do i use 2 open this ?

[evilpownerr]

from the top what do i need 2 download(all nessasarry files 2 make controller work) and where maybe gimme a link

[gd.parry]

Hey, I got Windows to find the PS3 controller, and the calibration seems fine too.

Its just on ProEvo 6 it doesn't seem to like the buttons, as previously posted, it only finds the toogles and L2, any ideas?

PS - Thanks for the tips:)
Have you checked the settings for controllers under the Start menu - START>KONAMI>PRO EVO 6(or whatever ur folder is)>SETTINGS. i often find i have to check that as i use diff controllers for diff games. 360 wont work on GTA series properly

[bloodydeath0]

Can't get it working. Installed everything, and it's not detected on my list of drivers. Worst part is I don't know how to uninstall the driver. I deleted all the files but if I try to reinstall it it says it's already installed, and I have no idea where the file is. I might just try a system restore, but still, I don't know why it ain't working.

[bloodydeath0]

Nevermind, the wire I was using was just faulty. It was detected and is properly working :). Gonna try it out now.

[illincrux]

Ok, I tried everything, and nothing worked.

I'm running windows vista 32, and the way I got it working was:

1.)I installed the driver in safe mode.
2.)I created a new windows profile.

After logging into the new profile, everything is now peaches and cream!
Note: It probably doesn't matter that I've installed it in safe mode...

[dtny]

Thanks alot for this. Works perfectly, and on 1st try. :)

[iviyth0s]

anybody get any word of a 64bit version of the driver i can't get my ps3 controller to work on my computer (Vista 64) but when my new laptop comes i will try it on there (which has Vista 32)

[hockey2112]

Does anyone know if a bluetooth river for the SIXAXIS is currently being worked on? I'm still hoping for that!

[Roger_Derby]

everything seems to be working but when i go to set it up in the controle panel and click properties on the controller it tells me it is not connected properly when it blatently is

[RIPERBOMBER]

Thenx Very Match Mean

[playgamerz]

i installed the driver and when i get run the ps3sixaxis_en.exe a cmd prompt comes up for 1 second and says five buses found
i ran the test as well and it registered everything well what can the problem be?

ok but if it doesn't work ?:confused:

i need the usb driver cause the first post file doesn't work........

any hints ?:D

:)



You'd most likely have to set it up the manual way.

by adding new hardware threw the patch system, its a pain and hardly worth it. It took me forever to do it with the 360 controller.

you mean the 360 usb cable ?
cause i have it but i didn't manage
to make it work ......... any hints ?

[near805]

great dude
thanks

[gathor]

wow it works

thanks

[Farlo]

I didn't want to look through 33 pages for an answer.

I did everything exactly as described, and Windows recognizes it... kind of.

When I go to the Game Controllers options in control Panel, it shows the PS3 controller as working, but when I go to properties, none of the test buttons and axis tests respond. The controller flashes all 4 buttons slowly and then turns off. Any help is appreciated.

[Eviltaco64]

Does the Dual Shock 3 work?

[DFS Vegas]

Can somebody upload the Japanese/Korean (it's been referred to as both, I have no idea which one it is) driver that was posted earlier in the thread? The link everybody kept posting no longer works.

**EDIT**

It's the drivers from this post...


http://ipvideo.512j.com/bbs/bmb/topic.php?filename=216
download from: http://ipvideo.512j.com/bbs/bmb/attachment.php?am=0&filename=216&forumid=1088132564&article=217
http://ipvideo.512j.com/bbs/bmb/upload/forum1088132564_221_0_1166935834.gif

The links no longer work... Like I said, could somebody please upload them?

**EDIT**

Ok, I did some googling, and found a link to the Japanese Sixaxis driver...

http://www.mediafire.com/download.php?f51wij0y3ld

After spending an hour with the thread starters driver, and getting no results, I tried this one, and it worked immeadiately... Download it now... Before you ask, it only works on USB, and Sixaxis functions don't work.

[superlaxstar112]

this is cool

[thorlacius]

This is very cool! But i have a problem when using it in Fifa 2008. I cant assign all my buttons, fx I can't assign any of the buttons on the right side (∆ O X □) Aswell as the R/L 1-2 buttons.

Any solution for this or is this just "ment to be" :)

[tineekillah]

Couldn't get this to work. Whenever I run the ps3sixaxis_en.exe it just shows a command prompt for a second then exits right away and won't let me do anything. Anybody have any ideas?

this also happens to me

[zsmith1744]

I have my SIXAXIS as a video game controller now and it is great. I use it for Fly2K and TMN all the time. my question is, is there anyway to make it the mouse?:confused:

[a1solid_snake]

Nice, Amazing, xtreme!!! its the best driver i've seen so far, it works! just follow the instructions and everything it's OK!!!

[KirbyKid]

I can't get it to work

[dragon186]

i will try also hope it works

[zaq101]

cool, i still get the 4 blinking dots so mine might not be installed correctly, but my computer picks up all my actions with the controller in properties, and my madden 08 on my computer recognizes my button pressing. i just cant adjust what i want each button to do....yet

[mypassword1smyname]

OK Im about to pull all my hair out and throw my pc off my balcony. I have been sitting here for hours on end, encountering problem after problem. Okay so i followed the instructions, didnt work. I searched the net, found some hopeful solutions tried them out, and it would seem that it was going to work (when i select test program, the appropriate code comes up) so i go to control panel, game controllers. The ps3 sixaxis is listed, status is OK. I click properties and BOOM error. It says that the game controller isnt connected properly and that i should verify its plugged. What shits me the most is that i could access the test previously, with no numbers lighting up, but now that i seem to have fixed the controller issue i get this problem. I've also tried connecting a 2- axis, 10 button gamepad, and get the same error. PLEASE i am begging anyone who can help to do so, i just dont know what to do anymore.

[Troa11]

Holy crap! I too spent hours dicking around with the original "drivers" posted here to no avail. 30 seconds with these and BAM I'm in business. This is how drivers are supposed to work!


Can somebody upload the Japanese/Korean (it's been referred to as both, I have no idea which one it is) driver that was posted earlier in the thread? The link everybody kept posting no longer works.

**EDIT**

It's the drivers from this post...



The links no longer work... Like I said, could somebody please upload them?

**EDIT**

Ok, I did some googling, and found a link to the Japanese Sixaxis driver...

http://www.mediafire.com/download.php?f51wij0y3ld

After spending an hour with the thread starters driver, and getting no results, I tried this one, and it worked immeadiately... Download it now... Before you ask, it only works on USB, and Sixaxis functions don't work.

[shogunmidas]

for some reason, in order to get this to work for me, i have to unplug my wireless usb mouse. and when im done using the sixaxis, and i plug my mouse back in, it instantly dosent recognize my sixaxis any longer. and i have to start from scratch with the install. any ideas on this? has this happened to anyone else? im on vista btw...

[manu2]

Has anybody tried this with a Dual shock sixaxies controller?? ... when i get home i'll try it .. should work right???

hopefully the DS3 6axies + PES 2008 will be deliverd today .... can't wait to try'em out ..

:cool::D:cool::D:cool::D:cool:

[kami44]

ok this worked for me but now when i try to use my six axis with me ps3 again the thing is stuck in charge and the blue tooth is switched off, anyone know how to fix this, this is a very bad problem as it pretty much makes the controler useless for the system.

[manu2]

it didn't work for me at the begining but then after searching here and there i found this . wriitne by Crustie from http://zedomax.com/blog/2006/12/09/ps3-hack-ps3-six-axis-controller-can-be-used-in-windows/


It works, open the control panel on your pc. Click game controllers, select the ps3 controller on the list then click the properties button. Now run the usbdriver exe thingy and immediately press the ‘PS’ button. Then look over to the test window press a few buttons on your controller and you should see some lights light up. If it doesnt work repeat the process. If it still doesnt work make sure your PS3 is powered off with the off switch if it is near by, then reconnect the controller to the PS3 with the usb cable and repeat the steps.

This is the way I have gotten it to work for me pretty simple. I just had another question has anyone gotten the PS3 controller to work via Bluetooth? I have a Belkin Bluetooth USB Adapter and I do a scan for devices and have been unable to the detect the PS3 controller.

and now it works for me 2 .... yeepppppeeeeeee ...

[beiowulf]

It won't le tme open the attached file. What file is it supposed to be open with?

[jedijawn]

Anyone that is STILL having trouble (like i was) try TURNING OFF YOUR PS3 if you have one near your computer.

If its on while your trying to use a ps3 controller on your pc, its not going to work.
Try turning off the controller when your ps3 is on, by pressing the ps button then on the ps3 go down to turn off controller. (you might need 2 controllers as this may turn back on some time later)

[jedijawn]

I have my SIXAXIS as a video game controller now and it is great. I use it for Fly2K and TMN all the time. my question is, is there anyway to make it the mouse?:confused:
Try using Xpadder.com once you are able to connect it you can use this free program to bind any keys to your controllers (mouse...etc). :)

http://www.xpadder.com/

[BYN]

Hi!

I've tried both the driver posted in this thread and that sixaxisdriver.exe. Both worked on my PC but both of them assigned the triggers to buttons. I want to play racing games with this gamepad so I need the triggers to be assigned to axes.

Are there any drivers that assign the triggers to axes or have the function of remapping the sticks, triggers and buttons?

[krugericlaw]

Ok. May have found a simple Solution to some problems that people had before, don't know if anyone's already found this problem and posted it, but hey, why not.

4 LED's light up flashing. Ignore it, it doesn't matter.

Controller's recognised in "Game Controllers" menu in Control Panel. Try to press buttons? No Reactions.

Now, did you install the Lib Filter thing? I think this might've been a BIG MISTAKE.

When you're in the Game controller properties and looking at the button pictures and the axis things, open the Task Manager, find the "lib-something" Process and END it.

Bam. Started getting reactions from the controller.

Peace out.

[Ghengis]

Can somebody upload the Japanese/Korean (it's been referred to as both, I have no idea which one it is) driver that was posted earlier in the thread? The link everybody kept posting no longer works.

**EDIT**

It's the drivers from this post...



The links no longer work... Like I said, could somebody please upload them?

**EDIT**

Ok, I did some googling, and found a link to the Japanese Sixaxis driver...

http://www.mediafire.com/download.php?f51wij0y3ld

After spending an hour with the thread starters driver, and getting no results, I tried this one, and it worked immeadiately... Download it now... Before you ask, it only works on USB, and Sixaxis functions don't work.


Bless you, bless you, bless you. I wrestled for an hour with sixaxis_en and couldn't get the buttons to respond in the Control Panel. This Just Worked. Awesome!

[JAWONB13]

hey cool

[BLUESTREAK40]

i NEED THE CONTROLLER DRIVER FOR 64BIT VISTA

[DeNven]

Reply : BLUESTREAK40

The controller won't work on vista.
I havn't tried the Japanese driver yet...
If anyone can show me that I am wrong, I will be very very happy.

[darrylh82]

After about an hour i realized that if i press the ps button while running ps3sixaxis_en.exe it quickly flashed ps3 controller recognized or something like that then bam it worked. I had redone every step 20 times and this is what did it... hope this helps

[DeNven]

Those of you who want to use "ps3sixaxis_en.exe, download the older version of libusb-win32-filter-bin. Use V 0.1.10.1
I had a problem when using V 0.1.12.1

Try this link:

http://nchc.dl.sourceforge.net/sourceforge/libusb-win32/libusb-win32-filter-bin-0.1.10.1.exe

Hope it helps

[machinelou]

I found two pages that describe the bluetooth pairing procedure between a computer and the sixaxis controller. So far, the technique has only been implemented in Linux and OS X. I am referencing them here so that more people will understand how the procedure works and so that hopefully someone might create a windows implementation.

Here are the links-
OS X:
http://lists.apple.com/archives/Bluetooth-dev/2007/May/msg00007.html

Linux:
http://www.pabr.org/sixlinux/sixlinux.en.html

The linux version contains some actual code.

Basically, the problem is that the sixaxis controller does not accept incoming bluetooth connections. When used with a PS3, the procedure is to first connect it via USB. When this happens, the PS3 tells the controller the bluetooth id of the PS3 and when the user presses the P button, a connection gets established.

The reason why several people have reported an inability to pair the sixaxis controller with their computers is because they would require connecting the sixaxis via USB first and then running a program to tell the sixaxis the computer's bt-id. At the moment, software for this only exists for OS X and Linux.

Why would someone want to connect a sixaxis to their computer in the first place? Here are some reasons.
1. You get a wireless controller to play PC games.
2. Developers can create software that takes advantage of the accelerometers and gyros in the sixaxis which would likely be innovative, interesting, and entertaining.
3. For my own purposes, a handheld wireless accelerometer package with 6-degrees of freedom (unlike the wimote's 3 degrees of freedom) is more or less a holy grail for studying movement. Typically, something like this might cost tens of thousands of dollars to a researcher like myself so, if there's anyway to make $50 controller do the same thing, that would be amazing.

[hockey2112]

Wow, I really hope that someones does create an app that enables bluetooth/sixaxis for Windows. That would be very excellent!

[bobxoxo]

Anyone know whats wrong here?

everytime i download something free its a virus lol

[mr_weapon]

Hi, I'm new on this... is any way i can play ps2 games on ps3 console of 40gb??? as far I know 60gb ps3 can... also 80bg ps3 has a software... but 40gb ps3 doesn't. anybody knows where to get that emultaor/software for ps3 40 gb?

thanks.

[aboutblank1]

Thanks! Worked flawlessly

[DeNven]

Reply: ps2 games on ps3 40 gb

As far as software has gone...you are going to wait for a looooong time. But *IF* software comes out, get ready to have a linux OS on your PlayStation.

[DeNven]

I got someting with VISTA. "Now motion sensor value(3-axis) is available via USB".
Check it out

http://onakasuita.org/ps3/

If you want a direct download link:

http://onakasuita.org/ps3/SixAxis_20070506.zip

[Merzu]

i have tried everything in the net about installing it and getting it to work.... but still i cant get it to work. it works with a japanese sixaxis driver but the most of the buttoms are gone, because there are 2 direction buttoms. (kinda retarded:confused:) sÃ¥ plz someone help me. send me mail plz [email protected]:o

[zulu290]

mine doesn't work either, but there is a you tube video of a guy doing it, and he shows you how.

[ArticBlaze88]

i followed all the instructions tried over 30 times but it won't work, it recognizes it but it won't work on my vista 64 bit so i tried it on my other computer which has windows xp 32 bit and it worked on my first try.

[totukuul]

I'm not sure,but I get controller recoginised and working in control panel and in dev.manager,but not
in games?How to switch from mouse and keyboard
to sixaxis controller? games? STALKER. COD2. GRAW2
Any ideas please!

[nydmt]

everytime i download something free its a virus lol

4 reallllllllllllllll lol :rofl:

[mooseberry]

I can't get it to work....

[mysticdreamer83]

well mine worked, first you have to install the program first. Then you plug your control via usb, then yu run the >rar program once

[ddmids]

I got someting with VISTA. "Now motion sensor value(3-axis) is available via USB".
Check it out

http://onakasuita.org/ps3/

If you want a direct download link:

http://onakasuita.org/ps3/SixAxis_20070506.zip

I've tried that.
Installed sixaxisdriver.exe, pluged in gamepad, loaded sixaxisdriver and ran SixAxis.exe. But it just opened a window showing the motion sensor axes data but the motion sensor axes couldn't be recognised by controller panel and some games. Any ideas?

[ecco1375]

How do you remove all traces of the driver from the computer? I was trying another driver, but the person that made it said it was conflicting with this one. I did a search for all the files with ps3sixaxis_en in regedit, but they were still conflicting.

[ceebace]

same for me

[DeNven]

I've tried that.
Installed sixaxisdriver.exe, pluged in gamepad, loaded sixaxisdriver and ran SixAxis.exe. But it just opened a window showing the motion sensor axes data but the motion sensor axes couldn't be recognised by controller panel and some games. Any ideas?


This is just a test project. Its trying to show how motion sensing on the sixaxis is on its way. :thumbup:

And as for the rest of you who cannot get your sixaxis to work on pc, download the driver posted on the first page, or download the japanese version (which has caused fatal windows hardware errors when installing and uninstalling)

There's another driver that comes from iraq. Yet I am nowhere near there and as a result don't know shit about this driver. If anyone is willing to try it. Go ahead. It sounds reliable. Thats what I thought about the japanese one, and ended up loosing all my data, and having to re-install windows. (I hate activation)

Try this page
http://www.iraqigeek.com/winsixaxis/

direct download link
http://www.iraqigeek.com/download/click.php?id=25

but you need to install libusb
http://nchc.dl.sourceforge.net/sourceforge/libusb-win32/libusb-win32-filter-bin-0.1.10.1.exe

and you also need to install PPJoy. I do not have a direct link, but check this page
http://www.simtel.net/product.download.mirrors.php?id=75176

Try this if you want. I am NOT forcing you because force is a crime.
Tips
When restarting, SAFELY Remove (don't just pull it out, check the notification area and "safely remove it there") the sixaxis and then re-boot. Try this at your own risk.

Hope it helps :-]

[ps3freak]

hi! does anybody know how to charge a Sony PS3 SIXAXIS controller on a pc? my ps3 broke down and i did send it to reperation center and it will be bakc in a month but when i play at pc the battery goes out! anybody help! by the way it works great on pc using this guide! Thanx!

[dnniwa485]

thx buddy,,,

haha now this controllers rock

[Shrygue]

@ps3freak: Simple, just use the same USB cable that charges your Playstation 3 console and put it the computer.

[macdaddymilkman]

doesnt work, reported

[tinania]

This is what I did.

1. Uncompress Sixaxis_PS3_Win32_Driver_For_PC.rar
2. Install or double click libusb-win32-filter-bin-0.1.10.1.exe
3. Plug your Usbcable the comes with Ps3 into your PC
4. Plug your Usbcable attachmate to the ps3
5. Wait 30 sec, it will recognize it.
6. Run the file ps3sixaxis_en.exe
7. Don't worry about what pops up. I did not.
8. Go into Control Panel
9 Go to game controllers
10. You should see yoru controller.
11. select your controller and click Propertise
12. Move the axis around and press buttons, it all works

TESTING: I have assassians creed installed on my PC (winxp), I ran that, went into option, change controller and ps3 showed up and its working!.

[ps3freak]

Does anyone know how to reassign the buttons to different numbers?… Considering FIFA 08 doesnt feel like reading all 19 buttons… it only reads 1-9 and its sort of inconvient passing w/ L3… thnx

[tomdotcom]

after you run ps3sixaxis_en.exe you should find the ps3 controller under in the game controllers control panel.

[DeNven]

For only 12 button cfg, download the japanese version, and install it. But be EXTREMELY careful. I(and many other people who tested the driver) broke my pc the first time. I had to re-install my OS. However the second time was great. It will let you play games like FIFA07/08 And other EA Games which are so stubborn.

Link
http://www.mediafire.com/download.php?f51wij0y3ld

If you are still having problems with the ps3sixaxis_en.exe driver, make sure that the attached .dll file corresponds with the correct libusb version. This is most people's problem, as all they see in cmd prompt is "Found x buses" (x replaced with the number of buses)

ASSASSINS CREED KICKS ASS

[dynadom]

This Is Bullshit, It Does Not Work. And This ****ing Forum Should Take Down That Download. I'm Sure I Have A Virus Now! Assholessssssssssssssssssssssssssssss **** Youbitch

[DeNven]

This Is Bullshit, It Does Not Work. And This ****ing Forum Should Take Down That Download. I'm Sure I Have A Virus Now! Assholessssssssssssssssssssssssssssss **** Youbitch


The japanese driver works. Its real, legal and virus free. You must have done something wrong when you installed it. To prove that it is real and virus free, check page33, and look at all the posts of success.

[jack324]

yeah, open rum and type "cmd". then work your way to the directory that you unpacked the everything to and type in the the name of the program. winxp dos not allow programs to open there own command prompts for security reasons, so you always have to run command prompt programs manually in xp.

[DeNven]

yeah, open rum and type "cmd". then work your way to the directory that you unpacked the everything to and type in the the name of the program. winxp dos not allow programs to open there own command prompts for security reasons, so you always have to run command prompt programs manually in xp.

When you place ps3sixaxis_en.exe into windows/system32, you will be able to immediately run the file without specifying dir's. The computer should not even think twice. However, my old (really shit) PC couldn't execute ps3sixaxis_en.exe directly from cmd prmpt :confused:. I'm thinking it didn't work because it was XP SP1. However, I do not have that problem now. If you know why this happens, post.

[emad46]

Very nice

[stuartmiller]

Whenever i try to install the libusb driver it says creating services, the progress bar is full and it just stops there, what am i doing wrong?

[Ruffi]

Is there any library to get the sixaxis information, like there is for the wiimote (like wiiuse) ?

[DeNven]

Whenever i try to install the libusb driver it says creating services, the progress bar is full and it just stops there, what am i doing wrong?

Not waiting. How long do you wait. One time I had to wait for...like...10 min. Or the libusb driver you have downloaded is corrupt with damaged files. Give me the download mirror you used, the full download link. :cool:

[DeNven]

Is there any library to get the sixaxis information, like there is for the wiimote (like wiiuse) ?

I don't know about wiiuse. Why do you need the information? There is a program which just gives hardcore ps3 remote use. click here (http://onakasuita.org/ps3/SixAxis_20070506.zip)

[Monkeywoman]

think there is a way to use the blutooth in my lappy to connect to the controller ?

[DeNven]

think there is a way to use the blutooth in my lappy to connect to the controller ?

No, Sorry :(. The ps3 remote is strictly restricted to work ONLY for the PS3. If you have linux, you are in luck (http://www.pabr.org/sixlinux/sixlinux.en.html), it will work. However, if you are running windows, your bluetooth won't communicate with the controller. One time, I don't know how, but I was able to communicate with the controller, but I couldn't access it (On windows).

This shows how the bluetooth will function:

If you put your ps3 on standby, then you press the ps button, the bluetooth signals meet and match and communicate with each other and the ps switches on. If you first switch on your ps, your controller will first look for a special bluetooth ps3 signal. Then it will bond with the ps.

Any other signal will be rejected by the controller.

[mickfitz]

jesus m8 u just talked a load of ballock there

im using windows and playing any pc game with my ps3 controller

just make sure not to have the ps3 controller pluged in when installing the drivers u should be good

[gamegeek2107]

whenever i download this all it asks is open or save so i save i go to open it and it asks open or save

[`mods]

I can't get this crap to work. =/

[Shrygue]

Read the readme then and prehaps look at the questins previously asked in this thread for an answer to your problem.

[DeNven]

Read the readme then and prehaps look at the questins previously asked in this thread for an answer to your problem.

Bra! Thats 40 pgs. Thats quite crappy. There should be...like...a search bar. No1 wants to go thru every single page.

[wiggy fuzz]

buy yourself an xbox 360 controller and stop complaining

[mitchy]

use this one here (http://nijntje.kicks-ass.org/sixaxisdriver.exe)

the one where you have to install libusb is unreliable for me this one works better

[dazboy]

cant get this to work on my xp

[Triv1um]

It works with XP and vista.

Posting that it wont work over and over again wont get help.

Read propperly and do it.

[Lurid]

Got it to work first try under Windows XP Pro. I just followed the directions in the first post.

[Stew2000]

Why am I only getting fouraxis?
is windows really that stupid?

[DeNven]

Why am I only getting fouraxis?
is windows really that stupid?

The answer to that question is YES. Microsoft can sometimes be complete assholes.:cool:

[MartyrX3]

hey guys! have any of you tried to run it with the gamecube emulator? and found that crashes it unless u start it up without the sixaxis connected to the computer?

[DeNven]

hey guys! have any of you tried to run it with the gamecube emulator? and found that crashes it unless u start it up without the sixaxis connected to the computer?

I guess you found a solution. Are you using Dolphin?:confused:? And which sixaxis driver are you using?

To anyone who knows the answer or is a Grand Theft Auto fan

How do i get the controls on my sixaxis (on gta san andreas) to match the same controls as the GTA SA ps2 version??? I mean...its just so damn wierd when you want to fly a hydra, you have to use your keyboard to make the nozzles point forward. I know that I can spend an afternoon half configuring the controller, but there is just too many controls and too few buttons (on the sixaxis).

[xpopxkidx110]

same for me :mad:
No luck here. The controller is seen via the control panel but, doesn't work for any of the tests(control panel) or via snes9x and znes.

[adamadam]

hi everyone do u have problems once u have download all the files and then vista well not open them wat should i do

[DeNven]

hi everyone do u have problems once u have download all the files and then vista well not open them wat should i do

vista 64 or vista 32

[nalisten]

DOes anyone know how to get the ps3 controller to work on my mac.
I got all the programs, usb overdrive and the gamepad companion.
I tried to follow all the instructions.
I just dont know how to Map the controller to work with my nes emulator.
it recognizes the controler when its plugged in but it wont work.
the 4 red lights just keep blinking.
can someone help and give me full in depth step by step instructions.
the gamepad companion screwed up my mouse too.
when I click on things its as if I am holding down the shift button.
I am using a Imac intel COre Duo with a 1.83 GHz Processor.
if anyone can help me it would be greatly appreciated

[dsl302g]

Thanks! Is there a way to stop the red lights flashing though?

[Clipsmoke]

when i try to calibrate i get no response from the buttons but it shows all the buttons being pressed on the calibrate screen. please help

[randomsquiggles]

I think i have solved it for us vista owners, what you have to do is install the patch, then don't run the exe file to bring up the dos prompt, instead right click it and properties, click compatibility tab and run it in XP mode. Simple. \o/

[Wesource]

press the ps button for like 10 seconds and then go to control panel and calibrate it and it will work.

Thanks! You were the one who helped me out!

[markslo111]

I tried playing Call of Duty 4 but it didnt work with the controller. My controller works just fine, but the game doesn't support the controller, i guess... Can someone tell me which games are good for controllers? Because i think not all games have controller support...

[killertofu72]

i actually tried it and its not like it doesnt work it just works funny for example i tried to play FF 7 on the pc using the ps3 controller and the buttons are messed up for example the left analog is to move not the d-pad R3 is the o button, start is the Triangle button, L2 is the select button and so on if anybody knows how to change this could u let me kno its quite annoying to play like this but it is playable

[jd90872]

I got it to work, but not for my MAME emulator. My genesis one picks it up right away, but the MAME doesnt. Anyone else have that problem?

[souji]

got the same problem as mavsman seeing the command prompt for a second.

[ffraine]

If anyone sees this, I need help uninstalling and reinstalling the windows drivers that automatically install when I plug in my dualshock 3.

I get the problem where i check Game Controllers > Playstation(R)3 Controller > Properties and it says "Your game controller is not connected properly. Please verify that it is plugged into your computer."

I finally got all the other steps working, including getting the ps3sixaxis_en.exe to recognize the controller using Wojjie's steps on page 13 of this thread, just this one problem is still stopping me.

If anyone knows how to reinstall the first USB Drivers for the PS3 that install when you first plug in the controller.

I will probably make a new topic for this soon, if no one responds.

[DeNven]

To EVERYONE!!!

If you have problems with the controller's buttons, get X-Padder. It will assign keyboard keys to your sixaxis. Eg. If i assign th "X" on my controller to the "x" on my keyboard, then go to notepad and press "X" on my sixaxis, the text that will be displayed is an "X".

(I know, many X'es)

Get it here. Its easy to use and is better than pinnacle game profiler. Why??? Because its free!

ALL YOUR GAMES WILL WORK! But you need to create seperate profiles for seperate games.

Get it here
http://www.xpadder.com/

or direct mirror link for
http://www.xpadder.com/downloads/releases/Xpadder5-0.zip

[DeNven]

If anyone sees this, I need help uninstalling and reinstalling the windows drivers that automatically install when I plug in my dualshock 3.

I get the problem where i check Game Controllers > Playstation(R)3 Controller > Properties and it says "Your game controller is not connected properly. Please verify that it is plugged into your computer."

I finally got all the other steps working, including getting the ps3sixaxis_en.exe to recognize the controller using Wojjie's steps on page 13 of this thread, just this one problem is still stopping me.

If anyone knows how to reinstall the first USB Drivers for the PS3 that install when you first plug in the controller.

I will probably make a new topic for this soon, if no one responds.

Read FULLY Before you try. And try at your own risk. This is to uninstall the windows driver and not lib-usb or the japanese driver

1.Go to divice manager (XP-Right-Click on my computer form the start menu, click properties, then click on the hardware tab.)
2.Make sure your sixaxis/dualshock is plugged in.
3.Find your sixaxis/dualshock form the tree view. Its probably in HID divices
4.Right-Click and choose uninstall

then your controller will not be recognised, but will be found. Once again, follow steps 1 and 2. This time, there shoulb be a usb drive with an unknown device. This is probably your sixaxis/dualshock.

1.Right-click on this port and click uninstall.
2.Unplug your sixaxis.

This should do the trick

[lalako12]

Why the guys who get it good they reply just one time in this forum ?? is it fake ?? me i guess that the sixaxis is recognize by the pc but can he works with only a bleutooth

[lalako12]

use this one here (http://nijntje.kicks-ass.org/sixaxisdriver.exe)

the one where you have to install libusb is unreliable for me this one works better

This look good yeah thank you men you are the best and thank the forum too

[Christina Loves free]

Points.FreebieTwist.com/?ref=168
Christina loves freeeee............

[Dudester4]

Okay i keep downloading the link; but windows just asks what program 2 open it in.... i've downloaded this thing from other sites and I keep having the same exact problem. ???????? waz up w/ this????

[Shrygue]

Right, what you need is a program to open RAR archives. Use something like WinRAR or ALzip. Use Google, you will see where to get a compression/decompression program.

[Stew2000]

Why the guys who get it good they reply just one time in this forum ?? is it fake ?? me i guess that the sixaxis is recognize by the pc but can he works with only a bleutooth

I have it working with USB cable. Downside is that it only works like a normal PS2 controller.
And the deadzones are annoying. especially in TDU. anyone know how to sort it?

[Dkr]

PS3 Sixaxis Controller/Dual Shock 3 Can Be Used In Windows Vista

1. Download the filter driver (libusb-win32-filter-bin-0.1.10.1.exe).

2.For Vista users right click (libusb-win32-filter-bin-0.1.10.1.exe) and in the compatibility tab check on ( run this program in compatibility mode for:[Windows XP],and also click the run as administrator then click apply and run the .exe

3. Plug the SIXAXIS or Dual Shock 3 into your PC.

4. Right click (ps3sixaxis_en.exe ) and in the compatibility tab check on ( run this program in compatibility mode for:[Windows XP],and also click the run as administrator then click apply and run the .exe

5. Go to the Control Panel and select the game controller options, and select the PS3 conctroller.

6. Select the properties button and in the setting tab click the calibrate button.

7. Push the PS button on the SIXAXIS or DS3 once and move the left stick around to see if it moves the cross in the box. If it does cancel the calibration, and go to the test tab to see if all the buttons work.

8.Hope that you are lucky:thumbup:

[wiggy fuzz]

i suppose there arn't any bluetooth drivers yet? *sticking to dual shock 2*

[DarkVenomKittie]

Hmm...can't get this to work.

[dnlbsschp]

is there a way to let R2 and L2 reactthe same as when i use it on my ps3? like it is a gaspedal?

[teddy860]

yeap i get same problem as above..
any ideas?

[masterchief929]

that is a really cool idea.

[Inuibanshin]

PS3 Sixaxis Controller/Dual Shock 3 Can Be Used In Windows Vista

1. Download the filter driver (libusb-win32-filter-bin-0.1.10.1.exe).

2.For Vista users right click (libusb-win32-filter-bin-0.1.10.1.exe) and in the compatibility tab check on ( run this program in compatibility mode for:[Windows XP],and also click the run as administrator then click apply and run the .exe

3. Plug the SIXAXIS or Dual Shock 3 into your PC.

4. Right click (ps3sixaxis_en.exe ) and in the compatibility tab check on ( run this program in compatibility mode for:[Windows XP],and also click the run as administrator then click apply and run the .exe

5. Go to the Control Panel and select the game controller options, and select the PS3 conctroller.

6. Select the properties button and in the setting tab click the calibrate button.

7. Push the PS button on the SIXAXIS or DS3 once and move the left stick around to see if it moves the cross in the box. If it does cancel the calibration, and go to the test tab to see if all the buttons work.

8.Hope that you are lucky:thumbup:

I'm stuck here. I go to properties and it tells me it's not plugged in correctly. I can't even get to the settings page to calibrate. Everything's plugged in correctly. I don't know what the problem is.

[Gibbs-]

I have vista and am having trouble just unpacking it lol... Anyone help?

[kentonyu]

can any1 tell me how to play fps games with the ps3 controllers? i wanna play bf2142 and bfv on it

[vrouwtjehier]

where the hell do i get ps3sixaxis_en.exe?

[Shrygue]

You find it in the RAR file archive attached to the first post. Read the instructions on how to get the PS3 controller working carefully and it will work.

[nDrg]

Thought i'd write a very quick guide to getting this to work:

1) Download Winrar from here (http://www.rarsoft.com/rar/wrar371.exe).
2) Download Ps3 driver files here (http://www.dcemu.co.uk/vbulletin/attachment.php?attachmentid=13008&d=1165434765).
3) Once Winrar is installed, navigate to the folder where you downloaded the PS3 files.
4) Right click the downloaded file and choose "Extract to 11679_Sixaxis_PS3_Win32_Driver_For_PC"
5) Copy the folder to your C: drive.
6) Open up a "Run" box by pressing the Windows key and the R key. Type "cmd" without the "" in here and press enter.
7) Type in here " cd C:\11679_Sixaxis_PS3_Win32_Driver_For_PC" once again without the ""
8) Plug in your controller and then type "ps3sixaxis_en"
9) If you get a result something like this:

found 7 busses
Dev# 0 : 8086 - 2830
Dev# 3 : 054C - 0268
found PLAYSTATION(R)3
InterfaceNumber = 0
initiated USB mode
Dev# 8 : 0A5C - 4500
Dev# 9 : 413C - 8126
Dev# 10 : 0A5C - 4502
Dev# 11 : 0A5C - 4503
Dev# 1 : 8086 - 2831
Dev# 2 : 8086 - 2832
Dev# 4 : 8086 - 2835
Dev# 5 : 8086 - 2836
Dev# 6 : 05A9 - 2640
Dev# 7 : 8086 - 283A

10) If you got a similar result to the above then simply press the PS button on your controller and you're good to go.
11) If however you did not, navigate to the PS3 drivers folder and install the libusb-win32-filter-bin-0.1.10.1.exe file and proceed from step 8.


Note: If your controller works but is not supported in certain games e.g. Crysis, use Xpadder to map the PS3 controller buttons to key strokes/mouse movements. I use Xpadder for all games that don't natively work with the PS3 controller and will be glad to give any help setting it up, just PM me ;)

[machanic]

Still doesn't work for me, tried everything I could from page 1 to page 16! I give up

[nofear_rex]

ok thts good bt have u tried playing cs with support of this software,it wont work,help me why,my sixaxis ds3 responds on gamepad test,bt dosent work in cs,,help me pls.:mad::confused:
u knw what iam gona be ur fan if u do this for me.....pls...

[hockey2112]

Has anyone heard of any developments re: using the SixAXIS with a bluetooth dongle?

[mohbana]

Has anyone got the drivers working on Vista Business 64bit? I've detailed my status on the following thread; http://forums.ps2dev.org/viewtopic.php?p=69891#69891. SIXAXIS libusb-win64 has been released but the issue-I think-- isn't with SIXAXIS libusb-win64 it's with ps3sixaxis_en, which simply crashes as soon as I run it, you can find more info on the thread I linked to. Secondly this thread is running just above/below 50 pages, and with the vast majority of people complaining that the drivers aren't, must imply that the quality of the implementation must be questioned.

I seriously hope the author would release something shortly, I'm pretty sure if we all email him, he'll release a fix. BTW obtaining the email is pretty simple, it's spitted out when you run the program!

[Kr0nZ]

Hi.. I've tried tried following the intructions in the first post and also tried univstalling those driver's and trying th chinese drivers but each time it doesnt work and wont allow e to calibrate in control panel
this is the info i get when i let libusb run if it anyhelp
bus/device idVendor/idProduct
bus-0/\\.\libusb0-0007--0x054c-0x0268 054C/0268
- Manufacturer : Gasia Co.,Ltd
- Product : PS(R) Gamepad

thanks -Kr0nZ

[robertc1985]

is there a linux port too?
i have vista on here, but i mostly run linux dualbooted

[mohbana]

is there a linux port too?
i have vista on here, but i mostly run linux dualbooted

The last time i tried -which was in ubuntu gusty 64bit- it worked (out of the box).

[PSPNEWBIE1234567]

it's supposed to close right after u use it, mohbana

[yagamiori]

im running win2000 and i got it to work, but i cant get it on cps1/cps2 emulators, but visualboy, zsnes, snesx9 and most of the others i've tried work flawlessly

[jedijawn]

Does anybody know if they have this working on bluetooth yet?? And does anyone have the drivers to utilize the rumbble feature??

[mohbana]

it's supposed to close right after u use it, mohbana

What are you talking about?

[Arel3]

wow this is great! If it really works. I haven't gotten it to work because:

libusb-win32-filter-bin-0.1.10.1.exe is broken
Can someone replace the download?

[Topfragger]

waste of time joining this site, all for what?

a Rar file with broken and corrupt files,
i downloaded twice the files are Corrupt and broken

**** me its as if its against universal law to use PS3 controllers on PC

you break your fingers and wade through all this trick dip shit for **** all

[Red_Skull]

Ahhh, finally!

I managed to get the PS3 controller working. It was a bit tricky, but this is what I did:

I originally installed a different version of libusb than the suggested one: 0.1.10.1

Each time I would uninstall and reinstall, it would keep the newer drivers. So what I ended up doing is:

1. uninstalling libusb
2. manually deleting the following files:
C:\WINDOWS\system32\libusb0.dll
C:\WINDOWS\system32\drivers\libusb0.sys

3. installing libusb 0.1.10.1 from here.
4. let the test application run after installation, and make sure the DLL and Driver Version is 0.1.10.1
5. Plug in your PS3 controller
6. Run the ps3sixaxis_en.exe program
7. Press the PS3 button on the controller.
8. Repeat step 6-7 till the ps3sixaxis_en.exe says "found PLAYSTATION(R)3 SIXAXIS controller", at which point the controller should work in Control Panel -> Game Controllers -> PLAYSTATION(R)3 Controller -> Test

Hope this helps those that are banging their heads like I was!

I've been on it all afternoon, but this is what made it work for me in the end.

THANXTHANXTHANX!!! XD

[Arel3]

I got it working by googling for the broken files.

Files get corrupt and fragmented if they're used a lot. It happens.

Admins of this (great) site: Please replace the download included in this thread.

[omeganemesis28]

Still doesnt work on Vista 64x

[sandslasher95]

I noticed that the PS3 buttons are very...strange...which is a problem because I'm playing a game where I can't assign buttons, so I'm having attack be select...any way to reassign the buttons? Like X be button 7?

All help appreciated :)

EDIT: As well I've used Xpadder but it doesn't work with the game I'm playing.

[Arel3]

I noticed that the PS3 buttons are very...strange...which is a problem because I'm playing a game where I can't assign buttons, so I'm having attack be select...any way to reassign the buttons? Like X be button 7?

All help appreciated :)

EDIT: As well I've used Xpadder but it doesn't work with the game I'm playing.

All buttons on all controllers are actually numbers in windows. Go to your control panel > game controllers

Click on the properties or test button and click the buttons on the controller to see what number lights up in the test as you press.
You may have to write them down to remember which button is what number. Then, as long as the game you're trying to use allows you to assign custom controls, you can organize the buttons the way you want them.


Still doesnt work on Vista 64x
Windows vista is very problematic. You're going to find a lot of things that work flawlessly in winXP won't work in windows Vista.
Because there aren't any vista drivers for it. Same thing with 32bit verses 64bit.

They've started making 64bit compatability but it isn't completely here yet.

[Douche Mccallister]

Maybe I'm an idiot but when I download the .rar I cannot open it with anything other then Windows Media Player. Any help would be greatly appreciated it.

[ROTS19]

hmm weird.. k here's how i got it working, really different and worked when nothing else that anyone posted did.

1. i installed the thing, then plugged in the controller,
2. moved ps3sixaxis_en.exe into the system32 folder
3. i went run cmd then just entered ps3sixaxis_en and then in that dos window it randomly said a bunch of stuff that i don't understand,
4. i tried to press the playstation button and nothing happened
5. then i tried steps 3 and 4 a few more times again
6. i was about to post here about how it still wasn't working but randomly(maybe it needed to sit there for a bit) all the controller port lights flashed(not just 1 of the ports) and so then i went back to test to see if it works and then it WAS working! now i can play mgs1 with ps3 controler on pc! doesn't need to be an emulator for it to work and must be using usb cable.

But there's still a problem with it, the Analog sticks don't really work right, i try to configure the move buttons to pushing the left analog stick in the way that it should to move in teh direction that i'm configuring it to but once that happens the analog doesn't seem to work properly. anyone know if there is a way to get that part to work? other than that this all works great. i hope it stays that way for when my comp reboots.

[dkwan20]

Okay, sorry if this has been answered but I can't look through all the 46 pages.

When you run ps3sixaxis_en.exe is the cmd prompt supposed to open and then close?

Can't seem to get this to work...

[Shrygue]

Yes, it's supposted to open and close like that. After it does, press and hold the PS button for at least 2-3 seconds. The controller should function after that.

[cirepa]

Muchas gracias por el driver, funciona a la perfección en mi cpu, ahora que la apague, a ver si todavÃ*a funciona a la perfección.

[B-Z 52]

awsome

[GStealth]

Wasnt sure if anyone asked or answered this, but I was wondering if someone could configure the driver to make the triangle, square, O, and X buttons be set as buttons 1-4 instead of 13-16, because the game Im playing doesnt recognize button numbers that high...

[tttyyyyyyyy]

So I still can't get this to work after a year. I did everything it says, and it doesn't work. Tried running it through cmd, it crashes. Why hasn't there been a more stable version?

It recognizes it in the hardware properties, but it's not allowing me to do what I want it to do. Am I supposed to put the .dll in sys32 or what? Directions aren't clear.

[davedurg08]

think i might have a fix add [email protected] to msn messenger and ill take you through step by step

[SSGotenksUFO]

When I run ps3sixaxis_en.exe, all it says is that it found 3 busses, and nothing else. I ran it from the desktop and the system32 folder. Windows detects the controller, but when I try to press the buttons in Game Controllers, it doesn't respond.

What am I doing wrong?

http://img528.imageshack.us/img528/6816/grrrrop2.th.png (http://img528.imageshack.us/my.php?image=grrrrop2.png)

[Akkeresu]

Good evening everyone,

I was having the same issue, detected, but not usable.

After scouring a few forums, I found a solution that works, and should be just fine.

Gamesake - SIXAXIS Setup.7z - 0.27MB (http://www.zshare.net/download/160222624b1a6a76/)

This driver set still requires LibUSB32, so install the latest version via Sourceforge, then install this. Simply click Load Driver. This has been tested via the Control Panel (12 buttons, X/Y Axis, Z Axis, Z Rot. and POH [D-Pad]) and ZSNES.

For you paraniod people like me, this was scanned via Zone Alarm Security Suite, latest version, using the Kapersky Engine, and was revealed to be clean.

So, with that, I take my leave, and wish you all happy gaming.

~Akkeresu

[Souls360]

Hi, this might have been posted before, but I really don't feel like reading 40 pages of that.. honestly.. -_-...

but does the driver only work for the vista x32 version, cause I'm running on the 64bit and I was wondering if it was functional on that too cause for me its not and and I would just like to confirm that status... if that being the case thats really gay... I wannna use iiittt!!! :(

[biz69]

When I run ps3sixaxis_en.exe, all it says is that it found 3 busses, and nothing else. I ran it from the desktop and the system32 folder. Windows detects the controller, but when I try to press the buttons in Game Controllers, it doesn't respond.

What am I doing wrong?

http://img528.imageshack.us/img528/6816/grrrrop2.th.png (http://img528.imageshack.us/my.php?image=grrrrop2.png)

i was getting that but i pressed the ps button while opening it and it came up with some other lines now it works:thumbup:

[daia218]

it does not come up as a zip file

[Chadwarden]

doesnt work

[Chadwarden]

please make one that WORKS...

[KmmDrew]

Good evening everyone,

I was having the same issue, detected, but not usable.

After scouring a few forums, I found a solution that works, and should be just fine.

Gamesake - SIXAXIS Setup.7z - 0.27MB (http://www.zshare.net/download/160222624b1a6a76/)

This driver set still requires LibUSB32, so install the latest version via Sourceforge, then install this. Simply click Load Driver. This has been tested via the Control Panel (12 buttons, X/Y Axis, Z Axis, Z Rot. and POH [D-Pad]) and ZSNES.

For you paraniod people like me, this was scanned via Zone Alarm Security Suite, latest version, using the Kapersky Engine, and was revealed to be clean.

So, with that, I take my leave, and wish you all happy gaming.

~Akkeresu

Ive done the same thing but unfortunately my Z axis registers as left and right and my z rot is up and down. Are you having the same issue?

[bambiii]

I have some problems running the ps3sixaxis_en.exe file.
tried running it from where I put the rest of the files and putting it in system32 and running it through cmd, same problem: "APPCRASH"

info:
Problem Event Name: APPCRASH
Application Name: ps3sixaxis_en.exe
Application Version: 0.0.0.0
Application Timestamp: 45658a9c
Fault Module Name: libusb0.dll
Fault Module Version: 0.1.12.1
Fault Module Timestamp: 45ffb86f
Exception Code: c0000005
Exception Offset: 000030ee
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1053
Additional Information 1: e229
Additional Information 2: f88f70b8142b1a88619677d49364e19b
Additional Information 3: 6953
Additional Information 4: 8a96c9843c160c9fc6cb355bc1182840

downloaded the sixaxis setup program as well, still no luck.

poops. there must be something I've missed..

EDIT: reinstalled everything and google->downloaded the files
now the test lib usb program can't seem to find anything and the
ps3sixaxis_en doesn't crash but it can't seem to find the controller it only states: "Found 7 busses"

although what is posted/quoted on page 45 here by Red_skull was some useful info on the way.

EDIT2: ok update #2:
been roaming this thread like crazy all day, deleted and reinstalled the .10 and .12 drivers and repeat several times, had my laptop crash, blue screens, accidently turned on my ps3 (lol), rebooted laptop in safe mode reinstalled the drivers and finally, both the testlibusb program and the ps3sixaxis_en detect my sixaxis controller!
(does anyone else sense a big Harry BUTler? yes it's coming)
BUT! when go into the Gaming controller in the control panel it says my controller isnt installed correctly and wont let me access that screen, and the controller is still flashing all four leds.

at the bottom of TestLibUsb where it has stated that it has detected the sixaxis it also says:
Unable to fetch serial number string
Couldn't retrieve descriptors
don't know if this is the problem though.

ps. I think the crash I was mentioning might've been cause the ps3sixaxis_en wasnt in the same folder as the other two files at that time.

[MyMother]

Hi. I did everything right and when I click that one thing, the black box appears for a quick second, then goes away. I hold the PS button but nothing happens..?

[BlAcKjAcK90]

Thanks for this, I needed it. It's very much appreciated!! :thumbup:

[Alize]

bummer, this isn't working for me either. im having the same problem everyone els here.

[mitchy]

bummer, this isn't working for me either. im having the same problem everyone els here.

try http://www.iraqigeek.com/winsixaxis/




anyone know if theres any progress with getting the ps3 controller linked up with bluetooth in windows

[protman]

I've had success with the implementation here which uses ppjoy and btsix; running 32bit xp.

http://forums.e-mpire.com/showthread.php?t=84809

[Akkeresu]

it does not come up as a zip file


doesnt work


please make one that WORKS...

Or, you can look at the extention. It's 7Zip, download it and extract and setup. It's not that hard.


Ive done the same thing but unfortunately my Z axis registers as left and right and my z rot is up and down. Are you having the same issue?

No, however, I would simply use a program to re-map the axis. I'm not sure as to what program to use, but I'm sure you can find it in the vBJirc or elseware in the forums.

[master123245]

hey can you try to get the filter in .zip?

[fernandez1991]

The Sony PS3 SIXAXIS controller can be used on a Windows PC but Windows XP and upwards would be best. It works as USB HID device under Windows.

Here's the instructions to make it work:

1. Download and install the filter driver (libusb-win32-filter-bin-0.1.10.1.exe). (attached zip)
2. Unpack ps3sixaxis_en.exe
3. Plug the SIXAXIS into your PC.
4. Run ps3sixaxis_en.exe once. A command prompt window will appear for a few seconds.
5. When the window closes, press and hold the PS button on the Sixaxis controller for at least 2-3 seconds.

If you want to see if the controller is being detected:

1. Go to Control Panel > Printers and Other Hardware > Game Controllers.
2. Select the Playstation 3 controller and choose Properties. A dialog window will appear.
3. Move both the analog sticks and press the buttons. The cursor and bars will move in the Axis section and the numbers in the Buttons area will light up.
4. If output is displayed, the controller is properly detected and working fine.


Download and Give feedback Via Comments
its dos not work I tried holding it for 2 or 3 seconds but it keep blinking can you help me pls.

[fernandez1991]

when it dosint blink it dos nothing I want to countrol panle and check but nothing.

[alibaba011]

very smart tweak.

[Ac3theone]

yesss it worked

[cucumel]

Red_Skull thanks for your post you make me succeed , finally after many tries . thank you.

@The rest his post is at page 45 , post number 449 it worked for me as he explained.

[Zaiaku]

Ok to anyone still having problems figuring out the driver. Once you plug in the controller to get it to "Sync" to your PC first run the en dos program, once it closes press the PS button. Now when you go to control panel and go to printers, other devices it will work fine. Also, games dont automatically detect the controller you have to reconfigure controls if a game does not support a joystick then the controller joysticks can not and will not work. Now a question of my own does the driver support multiple controllers?

[masterchief929]

after seeing this on the new posts page so many times and not actually clicking on it i had to come look at this thread. This is very impressive. I want to go and buy a PS3 controller so i can hook it up to my PC! What are some games you can play with the PS3 controller on the PC?

[Sinistar]

Anyone get this to work on XP 64? I've tried the notes in OP, and the PC recognizes the 6axis, but when I got to game controller control panel and hit the buttons, nothing happens, and I did hold down PS button for at least 10 seconds.

Any ideas?

[WiCkEd_ToFu]

anybody know why it crashed my USB pen? keeps sayin there isnt a Driver, but there is and that the device isnt recognized, its not the port(s), my other pens work fine, also the ps3 usb works fine

also, when i try to do an update or a rollback, it says there isnt anything better than what i currently have, or that there isnt a driver previously saved to rollback to :-/

[UniverseZero]

It doesn't work on my laptop. I use Windows Vista. What should I do?

[Bubonic]

Well mine works in calibration and stuff but when i try to play the pes 09 demo the controller doesnt work properly anymore :S

[Lucifix1130]

I triend this file and it says it is broken.... How can I fix it?

[Shrygue]

Hmmm? I've downloaded the RAR archive and it seems perfectly fine actually, no file corruption seen here. If the problem persists though, prehaps I'll add a zip file download to the first post.

[policarpo]

Well if it helps, it wasnt working for me until i ran the ps3axis_en.exe while pressing down the ps button, then it worked perfectly

:)

[SionTheSoulHunter]

This is old news, the ps3 sixaxis and dualshock 3 can now be used trough Bluetooth! Details on how to do it can be found here! (http://davieslim.wordpress.com/2008/09/15/use-ps3-controller-in-windows-wireless-bluetooth/) I assure you this isn't fake, I'm using my sixaxis atm to play FFXI ^^

[hockey2112]

This is old news, the ps3 sixaxis and dualshock 3 can now be used trough Bluetooth! Details on how to do it can be found here! (http://davieslim.wordpress.com/2008/09/15/use-ps3-controller-in-windows-wireless-bluetooth/) I assure you this isn't fake, I'm using my sixaxis atm to play FFXI ^^

Thanks for the heads-up!!

[TheDougler]

This make Doug Angry, Doug smash, now Doug angrier and have nothing to smash. Controller causes Dolphin emulator to crash, ideas?

[MANOLIS]

Hello Men.i 'm New In Pc And I Dont Know To Us It Well .any Way I Will Try To Join Better In Next Time.also Thanks For The Driver ....manolis

[r.sakai]

Well, after a few hours of searching, I've come to the fact that no one has managed to get this working under 64bit Vista, myself included.

Everyone always wants to post the link to this thread on this site, and give the run around, so, since this seems to be the root page for getting this to work, has anyone seen *any* update on a version, or a workaround, for 64bit systems?

I know this is a homebrew app, and I'm beyond appreciative that someone out there spent their own time to get this working, but there seems to be a lot of people wanting, with no real answers around.

So, *any* word on this?

[hockey2112]

Any word on how to get the SIXAXIS to work under XP 64-bit edition?

[antiseptic]

Any word on how to get the SIXAXIS to work under XP 64-bit edition?

I think we're going to have to wait until the next update for 64bit to work. It works fine in 64bit linux AND all the buttons work with with FULL analog support! (In the Linux drivers) I have no idea why the Windows version is slow off the boat or whatever the expression is.

[Darkdragon15]

Thanks For This XD Great Help