I hope this can help
http://www-public.tu-bs.de:8080/~y00...ne/node23.html
else try at http://www-public.tu-bs.de:8080/~y00...ine/index.html and more info at : http://linuxdc.sourceforge.net/
Good Luck
Hi I recently used Kegel's crosstool to build linuxsh against stock kernel 2.6.12.3
I used the sh-boot tree from the sourceforge linuxsh CVS patched with:
http://www.linuxdevices.com/files/ar...0831-1455.diff
According to the sh-boot/tools/dreamcast/README the initrd ramdisk image is loaded at 0x8c800000. So I created a ramdisk by doing:
# dd if=/dev/zero of=initrd.img bs=1k count=4096
# mke2fs -F -vm0 initrd.img
# mkdir initrd.dir
# mount -o loop initrd.img initrd.dir
# (cd initrd ; tar cf - .) | (cd initrd.dir ; tar xvf -)
# umount initrd.dir
# gzip -c -9 initrd.img > initrd.bin
The "initrd" folder contains the rootfs for the ramdisk and is about 1.9megs.
The only compiled is busybox 1.0. Other stuff are the kernel modules and the device nodes.
Ext2 support is builtin and I configured the kernel to make 1 ramdisk of 4096kbytes.
My init command string: root=/dev/ram0 rw rootfstype=ext2
initrd=0x8c001010,4M mem=16
When I copy both the kernel zImage (as zImage.bin) and the initrd.bin to the sh-boot/tools/dreamcast/ dir and do a make scramble kernel-boot.bin, it will not show any errors.
However when I load it on my dreamcast it crashes with:
"RAMDISK: Couldn't find valid RAM disk image
starting at 0.
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-
block(1,0)"
Any ideas?
I hope this can help
http://www-public.tu-bs.de:8080/~y00...ne/node23.html
else try at http://www-public.tu-bs.de:8080/~y00...ine/index.html and more info at : http://linuxdc.sourceforge.net/
Good Luck
SH4 Risc LittleEndian
Thanks alot, those pages reminded me that I needed to make the dev/ram nodes
I'll soon make a dclinux disc with all kinds of fun stuff to play with
I've made the first CD Cover for your upcoming LinuxSH 2.6 release (attached)!Originally Posted by Masta-G
Thanks for the awesome news!
For the image try to put the things that eat less resources, i want vim there :P
about the cover, put also a GNU http://www.gnu.org (Mr. Stallman gets angry allways he hears Linux instead of GNU/Linux :P) . Remember that Linux it's just only the kernel ;-)
Perhaps you can use this image : http://thelinuxfr.org/modules/xcgal/...m&cat=&pos=-35
thnks
thats awesome work bro
im not a real coder btw.
we should all thank zx80user, lethal, wmat and all other folks of the linuxsh team!
expect something nice in the near future
Woo hoo!
Thanks to the LinuxSH team and the Dreamcast porting team.
I am going to enjoy booting and using LinuxSH on the dreamcast.
I have exactly the same problem and may be you can help me because your post is from the last year.Originally Posted by Masta-G
Thanks a lot,
Mathieu SCHROETER
yeah definitly
I recently bought a broadband adapter from ebay so i'm using nfs now. But you can use the initramfs method which works much better compared to the seperate initrd ramdisk.
Asuming you are going to run busybox on the dreamcast you have to specify the initramfs source files path to the busybox installation dir in the kernel config. There should be at least a /dev/console and /dev/null node.
Don't put a root= option in the kernel command line, instead only use the init= option, for example init=/linuxrc. The initramfs source files will be compiled into the zImage and it will mount as root during boottime. After the zImage has been compiled you can try it out by sending and executing it on dcload. dcload -t /dev/ttyS0 -x arch/sh/boot/zImage -n. If you want to make a 1ST_READ.BIN for booting from cdr just get the latest sh-boot tree from the linuxsh cvs. It has the option to skip the use of a initrd ramdisk (since initramfs is already compiled into the kernel).
For more info have a look at the sh-linux wiki at http://linuxsh.sf.net/
Good luck bro
Thanks for your answer!
Yes I use sh-boot and the linuxsh.. I have tested the initramfs and now it works fine. Just that it works with the initramsfs and dc-load only if I "make kernel-boot.bin" before the upload.
If I use the zImage, there is an memory address error.
And for busybox it is all good.
Still problems with the last linux-2.6.17 and the DMA Channel for the Dreamcast.. It breaks the pvr2fb driver and it is necessary for use the AICA Sound driver. I have make patches for test the sound but there are still errors..
But it is an other story ;-)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks